MENU
#04449
10/100 LAN surge protector, PoE (PTF-51-ECO/PoE/Micro v2)
Single-channel protection for IP systems, along with a PoE line protection up to 60W. One hybrid class of surge protection, designed for indoor installation.
| Channels | 1 |
|---|---|
| Designed for | 10 and 100Mbit ethernet networks (twisted pair) |
| Protected pairs | 1+2; 3+6, 4+5; 7+8 (IEEE 802.3af/at compatible PoE) |
| Protection levels | 1 (hybrid) |
| Dimensions | 56x31x27mm |
| Manufacturer | Ewimar Sp. z o.o. |
The device should be connected with a cable with RJ45 plug (marked as TO DEVICE) and the yellow-green cable with the grounded line.
For full effectiveness, protective grounding must be provided on the other side of the cable.
For full effectiveness, protective grounding must be provided on the other side of the cable.
Call#04452
10/100 LAN surge protector, PoE (PTF-51-EXT/PoE/Micro v2)
Single-channel protection for IP systems, along with a PoE line protection up to 60W. Three hybrid classes of surge protection, designed for indoor installation.
| Channels | 1 |
|---|---|
| Designed for | 10 and 100Mbit ethernet networks |
| Protected pairs | 1+2; 3+6, 4+5; 7+8 (IEEE 802.3af/at compatible PoE) |
| Protection levels |
3 (GDT, MOSFET, TVS) |
| Dimensions | 56x31x27mm |
| Manufacturer | Ewimar Sp. z o.o. |
The device should be connected with a cable with RJ45 plug (marked as TO DEVICE) and the yellow-green cable with the grounded line.
For full effectiveness, protective grounding must be provided on the other side of the cable.
For full effectiveness, protective grounding must be provided on the other side of the cable.
#04445
10/100/1000 LAN surge protector, PoE (PTF-61-ECO/PoE)
| Channels | 1 |
|---|---|
| Designed for | 10, 100 and 1000Mbit ethernet networks |
| Protected pairs | 1+2; 3+6, 4+5; 7+8 (IEEE 802.3af/at compatible PoE) |
| Protection levels | 1 (hybrid) |
| Dimensions | 65x30x40mm |
| Manufacturer | Ewimar Sp. z o.o. |
#04447
10/100/1000 LAN surge protector, PoE, DIN-mount (PTF-61-ECO/PoE/DIN)
| Channels | 1 |
|---|---|
| Designed for | 10, 100 and 1000Mbit ethernet networks |
| Protected pairs | 1+2; 3+6, 4+5; 7+8 (IEEE 802.3af/at compatible PoE) |
| Protection levels | 1 (hybrid) |
| Dimensions | 65x30x40mm |
| Manufacturer | Ewimar Sp. z o.o. |
#04453
12VDC surge protector (SUG-7/12VDC)
Protection for devices powered with DC voltage up to 12V. It protects against sudden voltage increase, overvoltage pulses and lightning. The built-in fuse protects the power sources in the event of a short circuit in the receiver or cables, and reduces the possibility of fire.
| Purpose | 12VDC powered devices |
|---|---|
| Maximum voltage |
16VDC (line-to-line), 90VDC (line-to-ground) |
| Maximum current | 2A (pulse) |
| Protection level |
67A (line-to-line), 2x10kA (line-to-ground) |
| Connectors |
screw connectors (input and output), cable with 2.1 / 5.5 plug |
| Dimensions | 74x32x25mm |
| Manufacturer | Ewimar Sp. z o.o. |
It is recommended to use two earthed protective devices. One at the power source, the other at the receiving device.
#04456
230V surge protector (SUG-5)
Protection for devices powered with 230V. Meant for places where voltage decays often occur.
Miniature sizes allow to hide the device in junction boxes or housings.
Miniature sizes allow to hide the device in junction boxes or housings.
| Purpose | 230VAC power lines |
|---|---|
| Protection levels | 1 (hybrid) |
| Max. voltage | 4kV |
| Max. current | 10kA |
| Dimensions | 25x10x10mm |
| Manufacturer | Ewimar Sp. z o.o. |
The arrester should be connected between the neutral conductor and the phase.
#04454
24VDC surge protector (SUG-7/24VDC)
| Designed for | 24VDC powered devices |
|---|---|
| Protection levels | 1 (hybrid) |
| Dimensions | 74x32x25mm |
| Manufacturer | Ewimar Sp. z o.o. |
#04457
48VDC surge protector, DIN mounted (SUG-7-DIN/48VDC)
Protection for devices powered with DC voltage up to 48V. It protects against sudden voltage increase, overvoltage pulses and lightning. The built-in fuse protects the power sources in the event of a short circuit in the receiver or cables, and reduces the possibility of fire. The handle enables mounting directly on a DIN rail.
| Designed for | 48VDC powered devices |
|---|---|
| Maximum voltage |
56VDC (line-to-line), 90VDC (line-to-ground) |
| Maximum current | 2A (pulse) |
| Protection level |
19,7A (line-to-line), 2x10kA (line-to-ground) |
| Connectors | screw connectors (input and output) |
| Dimensions | 18x90x59mm |
| Manufacturer | Ewimar Sp. z o.o. |
It is recommended to use two earthed protective devices. One at the power source, the other at the receiving device.
#01895
Gas tube surge arrester, 3-pole, fail safe
3 Pole Gas Arrester protects telecommunication circuits against overvoltage which are usually caused by lightning.
Arresters are placed individually in special magazines, for each contact separately. Resistance grounding system should not exceed 4 ohms, which will provide the most effective protection when connected to the 3 pole gas arresters.
Arresters are placed individually in special magazines, for each contact separately. Resistance grounding system should not exceed 4 ohms, which will provide the most effective protection when connected to the 3 pole gas arresters.
| Size | 8x10mm |
|---|---|
| Voltage | 230V |
| Maximum impulse spark-over voltage | 800V (1KV/µs) |
| Impulse discharge current |
10kA, 8/20µs; 10 times |
| Impulse discharge current |
100A, 10/100µs; 300 times |
Compatible with: #01885- 10 pairs 3-pole surge arrester magazine
