MENU
#03862
Cable tester for multi-pairs cable (NOYAFA NF-811)
This wire tracker with a cable tester is a small and easy to use tool enabling long distance wiring tracing, patch cable order verifying, wiring voltage inspection.
| Tested cabling |
RJ-45, RJ-11 |
|---|---|
| Additional functions | flashlight |
| Dimensions |
Transmitter - 125x45x35 mm, Receiver - 185x35x23 mm |
| Weight | 113g (without batteries) |
| Power supply |
Transmitter - 9V 6F22, Receiver - 9V 6F22 |
The set includes:
- a transmitter,
- a receiver,
- RJ45 patchcord,
- a 6p4c cable with crocodille clips,
- earphones
- a transmitter,
- a receiver,
- RJ45 patchcord,
- a 6p4c cable with crocodille clips,
- earphones
#03059
Cable tracker and cable tester, VFL WT22C
The cable tracker is made for identifying and searching cables without breaching their insulation.
Additionaly, the device enables displaying the network cable connection map. The WT22C tester is equipped with a laser source of visible light, which also enables diagnostics of optical networks.
Additionaly, the device enables displaying the network cable connection map. The WT22C tester is equipped with a laser source of visible light, which also enables diagnostics of optical networks.
| Cables tested |
RJ45, RJ11, 2.5mm ferrule fiber |
|---|---|
| Operational modes | normal and slow |
| Performed tests |
connection map, telephone line voltage indicator, polarization index, continuity test |
| Signal | dual alternating tone |
| Output signal level | 15V p-p |
| Battery type |
6F22 9V (reciever), 3x 1.5V AA (toner) |
The set includes a transmitting and receiving module, a RJ45 patchcord, a test lead finished with crocodile clips and earphones.
#09347
Digital cable tracker and cable tester WT20B
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map and test PoE devices.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map and test PoE devices.
| Cables tested |
RJ45, RJ11 |
|---|---|
| Performed tests |
connection map, crimping quality test (RJ45 and RJ11), port flash, PoE tests, NCV detecor |
| Signal | digital |
| Output signal level | 15V p-p |
| Battery type |
6F22 9V (transmitter), 3.7V 800mAh (toner) |
The set includes a transmitting and receiving module, a RJ45 patchcord and a test lead finished with crocodile clips.
#03057
Digital cable tracker and cable tester WT22D
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map.
| Cables tested |
RJ45, RJ11 |
|---|---|
| Operational mode | normal and slow |
| Performed tests |
connection map, telephone line voltage indicator, polarization index, continuity test |
| Signal | dual alternating tone or digital |
| Output signal level | 23V p-p |
| Battery type |
6F22 9V (reciever), 3x 1.5V AA (toner) |
The set includes a transmitting and receiving module, a RJ45 patchcord and a test lead finished with crocodile clips.
#03058
Digital cable tracker and cable tester WT22E
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map.
| Cables tested |
RJ45, RJ11 |
|---|---|
| Operational mode | normal and slow |
| Performed tests |
connection map, telephone line voltage indicator, polarization index, continuity test |
| Signal | dual alternating tone or digital |
| Output signal level | 23V p-p |
| Battery type |
6F22 9V (reciever), 3x 1.5V AA (toner) |
The set includes a transmitting and receiving module, a RJ45 patchcord and a test lead finished with crocodile clips.
#03056
Digital cable tracker and cable tester WT25D
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Additionaly, the device enables displaying the network cable connection map.
| Cables tested |
RJ45, RJ11 |
|---|---|
| Operational mode | normal and slow |
| Performed tests |
connection map, telephone line voltage indicator, polarization index, continuity test |
| Signal | dual alternating tone or digital |
| Output signal level | 23V p-p |
| Battery type | 2x 6F22 9V |
The set includes a transmitting and receiving module, soft case, a RJ45 patchcord and a test lead finished with crocodile clips.
#03055
Digital cable tracker WT25C
The cable tracker is made for identifying and searching cables without breaching their insulation.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
Thanks to the use of a digital signal, the sound heard in the receiver is free from any kind of interference that occurs when using analog finders.
| Signal | dual alternating tone or digital |
|---|---|
| Output signal level | 23V p-p |
| Battery type | 2x 6F22 9V |
The set includes a transmitting and receiving module, a soft case, a RJ45 patchcord and a test lead finished with crocodile clips.
#08221
FLUKE PRO 3000 - Cable locator
The Pro3000 Analog Tone and Probe is the best choice for toning and tracing wires on non-active networks, specifically for identifying individual pairs with SmartTone™ technology. Angled bed-of-nails clips allow easy access to individual wires, and the RJ11 connector is ideal for use on telephone jacks. The large, loud speaker on the probe allows you to find wires quickly and easily behind drywall, wood, etc. Case attached.
| Transmitter | |
|---|---|
| Solid Frequency | 1000 Hz |
| Over Voltage Protection | 60VDC |
| Output Power in Tone Mode | 8 dBm 600Ohms |
| Output Voltage | 8 VDC dla pomiaru ciągłości |
| Battery | 9V alkaline |
| Case dimensions | 69 x 61 x 36 mm |
| Reciever | |
| Battery | 9V alkaline |
| Temp. operating | (-20 +60)C |
| Temperatura storage | (-40 +70)C |
| Dimmensions | 249 x 41 x 33 mm |
| Warranty | 12 months |
#02903
IntelliTone 200 Pro - signal probe, cable tester (Fluke Networks MT-8200-60-KIT)
| Tested cables |
UTP, FTP, STP, RG59, RG6, CCTV |
|---|---|
| Single pair test | yes |
| Wiremap test | yes |
| Detected malfunctions |
break, short-circuit, crossed pairs, reverse pairs |
| Detecting signals | Ethernet |
| Detecting connected devices |
hub, network card |
| Additional features |
locate cables from large distance (1 meter), precision locate cable pairs in wisps |
| Operating temperature | 0°C ÷ 40°C |
| Operating humidity |
5% ÷ 95%, non-condensing |
| Power | 2x 9V 6F22 battery |
| Warranty period | 12 months |
| Manufacturer | Fluke Networks |
| Toner parameters | |
| Dimensions | 141x75x32 mm |
| Display | LED |
| Control | thumbwheel switch |
| Auto power down | yes |
| Ouptut power | 5V p-p |
| Probe parameters | |
| Dimensions | 222x48x32 mm |
| Display |
8x LED, 1x Sync LED |
| Control |
thumbwheel switch, volume control wheel |
| Auto power down | yes |
#08220
IntelliTone 200 Probe (Fluke Networks MT-8200-63A)
| Interface | Main RJ45 port for mapping all 4 UTP / STP cabling pairs. |
|---|---|
| Dimensions | 222x48x32 mm |
| Display |
8x LED, 1x Sync LED |
| Control |
thumbwheel switch, volume control wheel |
| Auto power down | yes |
Page 1 of 2
|
