This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 21 November
New Items in Atel Electronics

NEW ITEMS


  • Communication for industry
      • » GIGABIT ETHERNET / MANAGED SWITCHES
          #06601

          Managed switch, 4x 10/1000 RJ-45 + 2x100/1G/2.5G SFP, O/Open-Ring <30ms (ORing IGS-C3042GP)

          IGS-C3042GP Series are managed redundant ring Ethernet switch with up to 8x10/100/1000 Base-T(X) ports and
          2x100/1G/2.5G Base-X, SFP socket which is specifically designed for the toughest. IGS-C3042GP Series support wide
          operating temperature from -40℃ to 75℃ which can fulfill most of the requirement of operation environment. Therefore,
          the IGS-C3042GP Series switch is one of the most reliable choices for highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100/1G/2.5GBase-X, SFP socket 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 18 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Dynamic ARP inspection,
          Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring
          DDM Function Voltage,
          Current,
          Temperature
          Power
          Input power Dual DC inputs. 12÷48VDC on 5-pin terminal block
          Power consumption (typical) 10W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 52mm x 110mm x 140mm
          Weight <700 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-14÷163°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55032) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          MTBF >400,000 Hours
          Warranty
          Warranty period 5 years
          ORING NETWORKING
          Net Price: 376.00 USD

          #06569

          Managed switch, 4x 10/1000 RJ-45 + 2x100/1G/2.5G SFP, O/Open-Ring <30ms (ORing IGS-C9042GP)

          IGS-C9042GP Series are managed redundant ring Ethernet switch with up to 8x10/100/1000 Base-T(X) ports and
          2x100/1G/2.5G Base-X, SFP socket which is specifically designed for the toughest. IGS-C3042GP Series support wide
          operating temperature from -40℃ to 75℃ which can fulfill most of the requirement of operation environment. Therefore,
          the IGS-C3042GP Series switch is one of the most reliable choices for highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 4
          100/1G/2.5GBase-X, SFP socket 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 18 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Dynamic ARP inspection,
          Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring
          DDM Function Voltage,
          Current,
          Temperature
          Power
          Input power Dual DC inputs. 12÷48VDC on 5-pin terminal block
          Power consumption (typical) 10W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 52mm x 110mm x 140mm
          Weight <700 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-14÷163°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55032) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          MTBF >400,000 Hours
          Warranty
          Warranty period 5 years

          #06604

          Managed switch, 8x 10/1000 RJ-45 + 2x100/1G/2.5G SFP, O/Open-Ring <30ms (ORing IGS-C3082GP)

          IGS-C3082GP Series are managed redundant ring Ethernet switch with up to 8x10/100/1000 Base-T(X) ports and
          2x100/1G/2.5G Base-X, SFP socket which is specifically designed for the toughest. IGS-C3082GP Series support wide
          operating temperature from -40℃ to 75℃ which can fulfill most of the requirement of operation environment. Therefore,
          the IGS-C3082GP Series switch is one of the most reliable choices for highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
          100/1G/2.5GBase-X, SFP socket 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 18 Gbps
          Max. Number of Available VLANs 4096
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Dynamic ARP inspection,
          Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring
          DDM Function Voltage,
          Current,
          Temperature
          Power
          Input power Dual DC inputs. 12÷48VDC on 5-pin terminal block
          Power consumption (typical) 10W
          Overload current protection present
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x D x H) 52mm x 110mm x 140mm
          Weight <700 g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-14÷163°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55032) class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          MTBF >400,000 Hours
          Warranty
          Warranty period 5 years
          ORING NETWORKING
          Net Price: 430.00 USD

      • » SINGLE PAIR ETHERNET SWITCHES
          #07998

          Unmanaged SPE switch, 4x 10 T1L + 1x 100 RJ-45 (ORing ITPS-141TX-T1L)

            ITPS-141TX-T1L is an ideal solution for factory, process automation infrastructure. The new single pair Ethernet technology can be integrated easily into an existing Ethernet infrastructure to simplify layout and also reduce the cost of cabling.

          • Supports SPE (Single Paire Ethernet) 10Base-T1L compliant with IEEE 802.3cg standard
          • Long distances point to point transmission up to 1000m
          • Supports SCCP PoDL(Power over Data Line) PSE Types compliant with IEEE 802.3bu standard
          • PoDL up to 50 Watts/1A per port
          • Supports PoDL legacy mode
          • Supports wide range 20~30VDC power input
          • Supports QoS and flow control
          • Rugged IP-30 housing design
          Physical Ports
          10Base-T1L with PoDL 4
          10/100Base-T(X) Port in RJ45 Auto MDI/MDIX 1
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3cg for 10Base-T1L
          IEEE 802.3bu for PoDL
          MAC Table 1K MAC addresses
          Processing Store-and-Forward
          LED Indicators
          Power indicator Green - Power LED
          10Base-T1L (PoDL) indicator Green for port Link/Act,
          Amber for PoDL PD device is connected
          10/100Base-T(X) RJ45 port indicator Green for port Link/Act.,
          Amber for 10Mbps/ Green for 100Mbps indicator
          PoDL
          24v Class 10~12,
          up to 20W
          50v Class 13~14,
          up to 30W
          Force mode Up to 50W/1A
          PoDL Dip switch
          PoDL On - Enable PoDL,
          OFF - Disable PoDL
          SCCP mode Turn on SCCP-based classification ensures full operating voltage is applied by the Power Sourcing Equipment (PSE) when a valid PD is connected
          Force mode Force enable PoDL without classification (Does NOT support hot plugging before enabling Force mode)
          Power
          Input power DC 24VDC (20~30VDC)
          Power consumption (typical) Max.3.47A
          PoE Power Budget 80Watts
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 28 x 108.3 x 145.1 mm
          Weight 530g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55032) class A
          Warranty
          Warranty period 5 years

      • » GIGABIT ETHERNET MEDIA CONVERTERS
          #07673

          Industrial Media converter 1x 100/1000TX (RJ-45) + 1x 1000FX (SFP) (Wave Industrial WO-IC-M1GF1GT)

          Physical Ports
          100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          1000Base-FX SFP ports 1
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          LED Indicators power,
          RJ45,
          SFP slot
          Power Dual DC inputs. 9÷48VDC on 4-pin terminal block
          Power consumption (typical) 3.3W
          Physical Characteristic
          Enclosure IP-40
          Dimension (W x H x D) 33mm x 115mm x 85mm
          Weight 330g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷85°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          WAVE INDUSTRIAL
          Net Price: 47.80 USD

      • » INJECTORS
          #06539

          Industrial Gigabit High Power Injector, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing INJ-101GT++-60W-24V)

          The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.
          Physical Ports
          10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 1
          10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 1
          Operating Voltage
          Input Voltage 9 ~ 57 VDC / 4-pin terminal block
          Power Consumption 1 Watts (Not include PD's device)
          PoE Power Budget 60 Watts max
          LED Indicators
          Power indicator PWR / Ready 1 x LED,
          Green On - Power is on and functioning Normally
          PoE Indicators 1 x LED,
          Blue On - PoE Device Link,
          Blue Off - None PoE Device Detected,
          Blink (Blue) - Overload present
          Protection
          Short Circuit Protection present
          Over Load Protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch)
          Weight 188g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷75°C (-40÷165°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC EN55032,
          EN55024(CE EMC),
          FCC Part 15B,
          EN61000-3-2,
          EN61000-3-3
          EMI CISPR 32,
          EN55032,
          FCC Part 15B class A
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years



Page 2 of 2