Physical Ports | |
---|---|
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
100/1G/2.5GBase-X, SFP socket | 2 |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 8192 MAC addresses |
Priority Queues | 8 |
Processing | Store-and-Forward |
Switching latency | 7 µs |
Switching bandwidth | 18 Gbps |
Max. Number of Available VLANs | 4096 |
IGMP multicast groups | 128 for each VLAN |
Port rate limiting | User Define |
Security Features |
Dynamic ARP inspection, Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security |
Network Redundancy |
STP, RSTP, MSTP, O-Ring |
DDM Function |
Voltage, Current, Temperature |
Power | |
Input power | Dual DC inputs. 12÷48VDC on 5-pin terminal block |
Power consumption (typical) | 10W |
Overload current protection | present |
Physical Characteristic | |
Enclosure | IP-40 |
Dimension (W x D x H) | 52mm x 110mm x 140mm |
Weight | <700 g |
Environmental | |
Storage Temperature | -40÷85°C(-40÷185°F) |
Operating Temperature | -40÷75°C (-14÷163°F) |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55032) class A |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-31 |
Vibration | IEC60068-2-6 |
MTBF | >400,000 Hours |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 4 |
100/1G/2.5GBase-X, SFP socket | 2 |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 8192 MAC addresses |
Priority Queues | 8 |
Processing | Store-and-Forward |
Switching latency | 7 µs |
Switching bandwidth | 18 Gbps |
Max. Number of Available VLANs | 4096 |
IGMP multicast groups | 128 for each VLAN |
Port rate limiting | User Define |
Security Features |
Dynamic ARP inspection, Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security |
Network Redundancy |
STP, RSTP, MSTP, O-Ring |
DDM Function |
Voltage, Current, Temperature |
Power | |
Input power | Dual DC inputs. 12÷48VDC on 5-pin terminal block |
Power consumption (typical) | 10W |
Overload current protection | present |
Physical Characteristic | |
Enclosure | IP-40 |
Dimension (W x D x H) | 52mm x 110mm x 140mm |
Weight | <700 g |
Environmental | |
Storage Temperature | -40÷85°C(-40÷185°F) |
Operating Temperature | -40÷75°C (-14÷163°F) |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55032) class A |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-31 |
Vibration | IEC60068-2-6 |
MTBF | >400,000 Hours |
Warranty | |
Warranty period | 5 years |
Physical Ports | |
---|---|
10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX | 8 |
100/1G/2.5GBase-X, SFP socket | 2 |
RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable (115200bps 8 N 1) |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3z for 1000Base-X, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3ad for LACP (Link Aggregation Control Protocol), IEEE 802.1D for STP (Spanning Tree Protocol), IEEE 802.1p for COS (Class of Service), IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol), IEEE 802.1x for Authentication, IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) |
MAC Table | 8192 MAC addresses |
Priority Queues | 8 |
Processing | Store-and-Forward |
Switching latency | 7 µs |
Switching bandwidth | 18 Gbps |
Max. Number of Available VLANs | 4096 |
IGMP multicast groups | 128 for each VLAN |
Port rate limiting | User Define |
Security Features |
Dynamic ARP inspection, Enable/disable ports, MAC based port security, Port based network access control (802.1x), VLAN (802.1q ) to segregate and secure network traffic, Radius centralized password management, SNMPv3 encrypted authentication and access security |
Software Features |
STP/RSTP (IEEE 802.1D/w), Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units, TOS/Diffserv supported, Quality of Service (802.1p) for real-time traffic, VLAN (802.1Q) with VLAN tagging and GVRP supported, IGMP Snooping for multicast filtering, Port configuration, Port status, Port statistics, Port monitoring, Port security |
Network Redundancy |
STP, RSTP, MSTP, O-Ring |
DDM Function |
Voltage, Current, Temperature |
Power | |
Input power | Dual DC inputs. 12÷48VDC on 5-pin terminal block |
Power consumption (typical) | 10W |
Overload current protection | present |
Physical Characteristic | |
Enclosure | IP-40 |
Dimension (W x D x H) | 52mm x 110mm x 140mm |
Weight | <700 g |
Environmental | |
Storage Temperature | -40÷85°C(-40÷185°F) |
Operating Temperature | -40÷75°C (-14÷163°F) |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55032) class A |
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 |
Shock | IEC60068-2-27 |
Free Fall | IEC60068-2-31 |
Vibration | IEC60068-2-6 |
MTBF | >400,000 Hours |
Warranty | |
Warranty period | 5 years |
ITPS-141TX-T1L is an ideal solution for factory, process automation infrastructure. The new single pair Ethernet technology can be integrated easily into an existing Ethernet infrastructure to simplify layout and also reduce the cost of cabling.
Physical Ports | |
---|---|
10Base-T1L with PoDL | 4 |
10/100Base-T(X) Port in RJ45 Auto MDI/MDIX | 1 |
Technology | |
Ethernet Standards |
IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3x for Flow control, IEEE 802.3cg for 10Base-T1L |
IEEE 802.3bu for PoDL | |
MAC Table | 1K MAC addresses |
Processing | Store-and-Forward |
LED Indicators | |
Power indicator | Green - Power LED |
10Base-T1L (PoDL) indicator |
Green for port Link/Act, Amber for PoDL PD device is connected |
10/100Base-T(X) RJ45 port indicator |
Green for port Link/Act., Amber for 10Mbps/ Green for 100Mbps indicator |
PoDL | |
24v |
Class 10~12, up to 20W |
50v |
Class 13~14, up to 30W |
Force mode | Up to 50W/1A |
PoDL Dip switch | |
PoDL |
On - Enable PoDL, OFF - Disable PoDL |
SCCP mode | Turn on SCCP-based classification ensures full operating voltage is applied by the Power Sourcing Equipment (PSE) when a valid PD is connected |
Force mode | Force enable PoDL without classification (Does NOT support hot plugging before enabling Force mode) |
Power | |
Input power | DC 24VDC (20~30VDC) |
Power consumption (typical) | Max.3.47A |
PoE | Power Budget 80Watts |
Overload current protection | present |
Reverse polarity protection | present |
Physical Characteristic | |
Enclosure | IP-30 |
Dimension (W x D x H) | 28 x 108.3 x 145.1 mm |
Weight | 530g |
Environmental | |
Storage Temperature | -40÷85°C |
Operating Temperature | -40÷70°C |
Operating Humidity | 5%÷95% Non-condensing |
Regulatory approvals | |
EMI |
FCC Part 15, CISPR (EN55032) class A |
Warranty | |
Warranty period | 5 years |
Page 2 of 2
|