MENU
 NOYAFA Products |
|
Cable testers, network testers, wire trackers |
- Computer Network Accessories
-
- » CABLE TESTERS#03867
Cable tester RJ-45 LCD with PoE 802.3af, 802.3at indication (NOYAFA NF-488)
The Noyafa NF-488 is an indispensable device for testing PoE installations. The device recognizes which lines have voltage, gives its value and determines the PoE standard. They can also be connected in series between the switch and the powered device, thanks to which it is possible to obtain information about the current consumption and the power consumed by the receiver.
In addition to PoE testing, the NF-488 performs a standard wiremap test to validate the wiring.Display 128x64mm backlit LCD Tested cabling RJ45 PoE voltage range DC 5 - 60V Recognized standards 802.3af,
802.3at,
nonstandardCurrent measurement 0 - 3A Power measurement 0 - 18W Detected failures incorrect connections,
short circuits and interruptions in the wiringBattery type 3x1.5V AAA Packaging cardboard,
caseThe set includes: etui, tester, terminator, set of 15cm measuring connectors.
Batteries are not included.
#03052Cable tester RJ-45, RJ-11 with PoE indication (NOYAFA NF-468PF)
A simple diode tester which enables checking the correctness of the plugs in computer and telephone connections. It is additionally equipped with a PoE voltage indicator.
The device uses diode indicators to inform whether and on which pairs there is PoE voltage.Tested cabling RJ45,
RJ 11Detected failures incorrect connections,
short circuits and interruptions in the wiringScanning modes normal and slow Power 9V 6F22 battery Packaging Blister Batteries not included.
#03050Cable tester RJ-45, RJ-11, BNC, USB w/external terminator (NOYAFA NF-3468)
Tested cables UTP,
STP,
USB,
coaxial,
phone cablesDetected failures incorrect connections,
short circuits and interruptions in the wiringAdditional functions Automatically recognizing terminator's impedance for 10Base-2 and 10Base-5 standards Kit includes tester,
case,
adapter for BNC terminatorsPower 9V 6F22 battery Manufacturer NOYAFA Batteries not included.
- » ADVANCED CABLE TESTERS#03883
Cable tester RJ-45 and Optical Power Meter, w/LCD, wire tracker, VFL (NOYAFA NF-8508)
Advanced cable tester that performs standard copper cable tests - wiremap, PoE test and length. Additionally fiber ports to perform optical power measurements and VFL. The other benefits are large colour LCD displayTested cabling RJ45,
RJ11,
fibre optic (2.5mm SC;ST;FC ferrule)Functionality location of the damage site,
cable length measurement,
detection of short circuit; interruptions; reverse connections,
measurement of the distance to damage,
dynamic calibration of cable lenght measurement,
temperature compensation,
sound signalingWiring tests cable lenght,
connection map,
digital pair finder with generator,
light penFiber optic tests OPM -70..+10dBm 850/1300/1310/1490/1550/1625nm,
VFL 10mWCable length measurement 10÷200m Measurement of the distance to damage yes PoE tests Standard/Non standard,
voltage measurement,
automatic detection,
60V maxWire tracker digital,
analogue 455kHzErgonomics big and clear LCD display,
automatic shutdown,
long operating time,
measuring data memoryPower in-built 1500mAh battery,
USB-C chargingDimensions 148x70x32 mm (main),
198x50x28 mm (reciever)Warranty 12 months Manufacturer NOYAFA The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - USB-C (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- case.
Do not connect the tester or terminators to networks with voltage> 20V.
#03081Cable tester RJ-45, w/LCD and 8 external terminators (NOYAFA NF-8108M)
The NF8108 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.Display LCD (53x25mm) Frequency of the audible signal 225Hz (after connecting the terminator) Max. length of the tested cabling 300m Length measuring accuracy 95% Max. current <70mA Function selection three buttons,
on / off buttonPower supply 4x1.5V (about 50 hours of work),
automatic shutdownTester dimensions 184x84x46mm Terminator dimensions 78 x 33 x 22mm Packaging cardboard box + soft case Warranty 12 months Manufacturer NOYAFA Calibration of the tester should be performed on a connector with a length of at least 10m.
The kit includes a tester, 8 numbered terminators, and a soft case.
#03807Cable tester RJ-45, w/LCD and scan detector (NOYAFA NF-300)
The NF-300 tester can detect disturbances and errors occurring in the network of coaxial, telephone, UTP and FTP cabling, categories 5, 5E, 6, 7.
The tester can measure the length of the cable, which also allows finding the exact location of its damage. The possibility of calibration increases the accuracy of the measurement.
The set is equipped with a finder that allows tonal location of pairs of wires.The batteries are not included.
#03808Cable tester RJ-45, w/LCD, wire tracker, ping testing (NOYAFA NF-8601W)
Advanced cable tester thet performs PING, PoE, wiremap and length tests. The other benefits are large colour LCD display and data export to micro SD card.
The device is equipped with a clear, backlit LCD display.Tested cabling RJ45,
RJ11,
BNCFunctionality location of the damage site,
cable length measurement,
detection of short circuit; interruptions; reverse connections,
measurement of the distance to damage,
dynamic calibration of cable lenght measurement,
temperature compensation,
sound signaling,
terminator identificationWiring tests cable lenght,
connection map,
digital pair finder with generator,LAN testing ICMP ping Cable length measurement 10÷1000m Setting the electric capacity of the tested cable yes Measurement of the distance to damage yes Ping test delay,
lost packetsErgonomics big and clear LCD display (320x240 pixels),
automatic shutdown,
long operating time,
export of measurement data to a micro SD cardPower in-built battery,
micro USB chargingDimensions 173x92x34 mm (main),183x58x35 mm (reciever) Warranty 12 months Manufacturer NOYAFA The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminators numbered from 1 to 8,
- case.
#03866Cable tester RJ-45, w/LCD, wire tracker, ping testing, TDR (NOYAFA NF-8601S)
The NF-8601S cable tester is an advanced device for complex network cabling tests.
The device is equipped with a colourful, backlit, 320z240 LCD display.
A noteworthy feature is the ability to perform a ping test with packet loss and latency measurement. In addition, the tester allows you to measure PoE voltage on each line and export the measurement data to an external micro SD memory card.
The NF-8601S tester measures the cable length and the distance from the fault using the TDR technology.Tested cabling RJ45,
RJ11,
BNCFunctionality location of the damage site,
cable length measurement,
detection of short circuit; interruptions; reverse connections,
measurement of the distance to damage,
dynamic calibration of cable lenght measurement,
temperature compensation,
sound signaling,Wiring tests cable lenght,
connection map,
digital pair finder with generator,LAN testing ICMP ping,
flash portCable length measurement 10÷1500m Setting the electric capacity of the tested cable yes Measurement of the distance to damage yes Ping test delay,
lost packetsErgonomics big and clear LCD display (320x240 pixels),
automatic shutdown,
long operating time,
export of measurement data to a micro SD cardPower in-built battery,
micro USB chargingDimensions 173x92x34 mm (main),183x58x35 mm (reciever) Warranty 12 months Manufacturer NOYAFA The kit includes:
- main unit,
- wire pair tracker,
- USB A (M) - micro USB (M) connector,
- crocodile clips,
- RJ45-RJ45 and RJ11-RJ11 connectors,
- terminator,
- case.
#03872Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209)
The NF8209 cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)Display LCD 128x64 dot-matrix with backlight Frequency of generator 130kHz Max. length of the tested cabling 200m (length test),
600m (wiremap)Length measuring accuracy 1.6m Max. current <130mA (emitter),
<100mA (reciever)Function selection graphical menu Power supply 3x1.5V AAA (emitter),
9V (reciever)PoE test range 5÷60V Packaging cardboard box + soft case Warranty 12 months Manufacturer NOYAFA The kit includes:
- emitter,
- reciever,
- remote,
- connection wires,
- soft case
#03884Cable tester RJ-45, w/LCD. PoE and port flash (NOYAFA NF-8209S)
The NF8209S cable tester is used to measure cable continuity. It enables the measurement of connection errors in UTP / STP twisted pairs. The device is equipped with an LCD display.
PoE detection and identify the standard (IEEE802.3at/af / non standard)Display LCD 128x64 dot-matrix with backlight Frequency of analogue generator 455kHz Max. length of the tested cabling 200m (length test),
600m (wiremap)Length measuring accuracy 1.6m Max. current <130mA (emitter),
<100mA (reciever)Function selection graphical menu Power supply 3.7V 1400mAh polymer lithium battery (both transmitter and reciever) PoE test range 5÷60V Packaging cardboard box + soft case Warranty 12 months Manufacturer NOYAFA The kit includes:
- emitter,
- reciever,
- connection wires,
- soft case
-
.jpg?1615192015)
.jpg?1615192017)
.jpg?1615192019)
.jpg?1615192021)
Page 1 of 2
|
