VUTLAN Products |
Server Rooms Monitoring Systems |
VUTLAN provides IP monitoring and power management solutions for enterprises and small businesses. Monitoring Systems and IP Power Distribution ranges are designed for large data centres, server rooms, web hosting facilities, 19 inch telecommunication racks etc. Environmental monitoring in the server rooms, on the telecommunication nodes, in data centers et cetera is of great importance to many if not to all companies. What are the indoor temperature and humidity, what happens to the air conditioning or fans, whether the line voltage has a huge impact on the reliability of the equipment and the service life of servers, switches, and routers. If you have the only rack with a couple of ups and two three servers, you need to install a small monitoring unit with 5-6 sensors, enter your notifications and logic and may be to connect an inexpensive USB cam. Built-in web server and video server allows you to view logs and events at your facility, the logic when properly installed will allow the monitoring system to accept most decisions, for example, to shut down servers at high temperature or at failure of air conditioning or fans, or in case of fire, etc. and to warn user with any notification or SMS (if GSM modem is installed). If you have a set of facilities and requires a scalable, easy-to-install solution for monitoring a distributed network, then you must either apply extension units and sensors that allow to gather information from wide area, or when there are absolutely great distances between nodes and objects, it is possible to use SNMP applications that allow to collect information from multiple remote sites and can be stored in any database, if necessary, to use this information by appropriate authorities. It is also important to use monitoring systems with easy scalability and a wide range of sensors,with longlife-warranty period at a reasonable prices. All this ensures the equipment from VUTLAN, the most modern manufacturer of IP monitoring systems! Manufacturer's website: http://www.vutlan.com
|
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, SMS (LTE modem art. VT740 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
DHCP; HTTP; HTTPS; DynDNS; SNMP v1, v2c, v3; SMTP; FTP; Syslog; TLS; RADIUS; OpenVPN; SSL; NTP |
OS | Linux v.6.2 |
Processor | 720 MHz |
RAM | 128MB |
Software | Built-in software for events processing. |
Alert type |
E-mail, FTP log, Syslog, SMTP, SNMP Traps, SMS (LTE modem VT740 is ordered separately!), Web-to-SMS |
A maximum number of "mail to" recipients | 20 |
A maximum number of "SMS to" recipients in an SMS notification | 20 |
Pings | Built-in ping |
LEDs |
LINK, CAN, ACT, E1, E2, ERROR |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
POWER | |
Power req | 2x12V DC |
Power consumption | 10W |
Power reservation |
12V, built-in voltage monitor |
INLETS/OUTLETS | |
Ethernet | 10/100Mbit |
Micro USB AB | USB 2.0 micro |
Analog port | 4x6P4C for connecting any analog sensor. |
CAN BUS |
1 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
Dry contact inputs | 4 x dry contacts input |
EXTERNAL MEMORY | |
Micro SD card | Micro SD card slot (SDXC up to 512 Gb) |
FEATURES | |
Installation | desktop (19" cabinet with VT122t) |
Dimensions | (WxHxD) 180mm × 35mm × 80mm |
Net weight | 0.7 kg |
Working temperature | Min. -10° C - Max. 80° C |
Supply includes |
Monitoring unit, 12VDC power supply, RJ45 cord, Micro USB cable adapter, plug 1x6P, 3.5mm, plug 1x3P, 3.81mm, plug 1x2P, 3.81mm, manual, warranty, 4 self-adhesive rubber legs, plugs. |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, SMTP |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
Built-in HTTP server, SNMP agent, SMTP agent, manageable logic. Uses FTP link for updating current software version. |
Processor | ARM926-300 MHz |
OS | Linux 2.6.38 |
RAM | 64Mb |
ROM | 512 Mbit NAND Flash |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP |
Pings | Built-in ping |
LEDs |
power, network, alarms; |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
POWER | |
Power input | 48V DC |
Power consumption | 6W |
Power reservation |
12V, built-in voltage monitor |
INPUTS/OUTPUTS | |
Ethernet | 100Mbit |
Mini USB AB | USB 2.0 HS |
Analog port | 4x 6p4c for connection of any analog sensor. |
CAN port | 1x6p6c (max 12 CAN sensors) |
Dry contacts | 4x |
12V outlets | 2x 0.25A |
FEATURES | |
Installation | Desktop or 19" (with #082222 19" holder / bracket for VT335 S monitoring unit - ordered separately) |
Dimensions | (LxHxW)206 x 33.1 x 79.4 mm |
Net weight | 1,2 kg |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, SMS (LTE modem art. VT740 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN |
OS | Linux 6.2 |
Processor | Cortex A7 720MHz |
Total CPU cores | 2 |
RAM | 128MB |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03105 is ordered separately) |
A maximum number of "mail to" recipients | 20 |
A maximum number of "SMS to" recipients in an SMS notification | 20 |
Pings | Built-in ping |
LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
The maximum amount of sensors | 130 |
The maximum amount of elements | 1000 |
USB cameras | x1 |
IP cameras | x4 |
POWER | |
Power req |
90-240V, IEC C14, Fuse 1A or DC (24V/48V) |
Power consumption | 10W |
Power reservation |
12V, built-in voltage monitor |
INLETS/OUTLETS | |
Ethernet | 100Mbit |
USB | USB 2.0 Type A |
Mini USB AB | USB 2.0 HS |
Analog port | 8x6P4C for connecting any analog sensor. |
CAN BUS |
1 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
Relay outputs | 2 ports |
Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
Dry contact inputs | 16 x dry contacts input |
EXTERNAL MEMORY | |
Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
FEATURES | |
Installation | 19" cabinet or desktop |
Dimensions | (WxHxD) 440mm × 44mm × 90mm |
Net weight | 1.5 kg |
Working temperature | Min. -10° C - Max. 80° C |
Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, SMS (LTE modem art. VT740 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN |
OS | Linux 6.2 |
Processor | 720MHz |
Total CPU cores | 2 |
RAM | 128MB |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03105 is ordered separately) |
A maximum number of "mail to" recipients | 20 |
A maximum number of "SMS to" recipients in an SMS notification | 20 |
Pings | Built-in ping |
LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
The maximum amount of sensors | 130 |
The maximum amount of elements | 1000 |
USB cameras | x1 |
IP cameras | x4 |
POWER | |
Power req | 2x IEC C14 90-240V 1A fuse or 2x DC (24V/48V) or 1x AC + 1x DC |
Power consumption | 10W |
Power reservation |
12V, built-in voltage monitor |
INLETS/OUTLETS | |
Ethernet | 100Mbit |
USB | USB 2.0 Type A |
Mini USB AB | USB 2.0 HS |
Analog port | 8x6P4C for connecting any analog sensor. |
CAN BUS |
1 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
Relay outputs | 2 ports |
Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
Dry contact inputs | 16 x dry contacts input |
EXTERNAL MEMORY | |
Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
FEATURES | |
Installation | 19" cabinet or desktop |
Dimensions | (WxHxD) 440mm × 44mm × 90mm |
Net weight | 1.5 kg |
Working temperature | Min. -10° C - Max. 80° C |
Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, SMS (LTE modem art. VT740 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN |
OS | Linux 6.2 |
Processor | Cortex A7 1GHz |
Total CPU cores | 2 |
RAM | 128MB |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03105 is ordered separately) |
A maximum number of "mail to" recipients | 20 |
A maximum number of "SMS to" recipients in an SMS notification | 20 |
Pings | Built-in ping |
LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
The maximum amount of sensors | 150 |
The maximum amount of elements | 1000 |
USB cameras | x1 |
IP cameras | x4 |
POWER | |
Power req |
90-240V, IEC C14, Fuse 1A or DC (24V/48V) |
Power consumption | 10W |
Power reservation |
12V, built-in voltage monitor |
INLETS/OUTLETS | |
Ethernet | 100Mbit |
USB | USB 2.0 Type A |
Mini USB AB | USB 2.0 HS |
Analog port | 8x6P4C for connecting any analog sensor. |
CAN BUS |
2 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
Relay outputs | 2 ports |
Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
Dry contact inputs | 32 x dry contacts input + 8 x dry contacts output |
EXTERNAL MEMORY | |
Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
FEATURES | |
Installation | 19" cabinet or desktop |
Dimensions | (WxHxD) 440mm × 44mm × 90mm |
Net weight | 1.5 kg |
Working temperature | Min. -10° C - Max. 80° C |
Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, SMS (LTE modem art. VT740 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN |
OS | Linux 6.2 |
Processor | Cortex A7 1GHz |
Total CPU cores | 2 |
RAM | 128MB |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem #03105 is ordered separately) |
A maximum number of "mail to" recipients | 20 |
A maximum number of "SMS to" recipients in an SMS notification | 20 |
Pings | Built-in ping |
LEDs |
CAN, ACT, E1, E2, Error, Relays R1 and R2 |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
The maximum amount of sensors | 150 |
The maximum amount of elements | 1000 |
USB cameras | x1 |
IP cameras | x4 |
POWER | |
Power req | 2x IEC C14 90-240V 1A fuse or 2x DC (24V/48V) or 1x AC + 1x DC |
Power consumption | 10W |
Power reservation |
12V, built-in voltage monitor |
INLETS/OUTLETS | |
Ethernet | 100Mbit |
USB | USB 2.0 Type A |
Mini USB AB | USB 2.0 HS |
Analog port | 8x6P4C for connecting any analog sensor. |
CAN BUS |
2 x 6P6C for connecting up to 32 CAN sensors (over 12 sensors, regeneration of the signal is required using the CAN # 03880 power module). Fuse protection on each line. |
Relay outputs | 2 ports |
Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
Dry contact inputs | 32 x dry contacts input + 8 x dry contacts output |
EXTERNAL MEMORY | |
Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
FEATURES | |
Installation | 19" cabinet or desktop |
Dimensions | (WxHxD) 440mm × 44mm × 90mm |
Net weight | 1.5 kg |
Working temperature | Min. -10° C - Max. 80° C |
Supply includes |
Monitoring unit, power cable 240V, RJ45 cord, manual, warranty, 4 self-adhesive rubber legs, plugs, 19" mounting angles. |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, manual SMS (GSM modem art. VT740 #03105 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN |
OS | Linux 6.2 |
Processor | dual-core CortexTM-A7 720 MHz / 128 MB |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem art. VT740 #03108 is ordered separately!) |
Pings | Built-in ping |
LEDs |
STATUS, E1, E2, ERR, 4x OUTLET |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
POWER | |
Power input | IEC C13 240V x 16A. Fuse protection. |
Power output | 4x C13 240V |
Power consumption | 10W |
INPUTS/OUTPUTS | |
Ethernet | 100Mbit |
Mini USB AB | USB 2.0 HS |
Analog port | 2x 6P4C for connection of any analog sensor. |
CAN BUS | 1 x 6P6C for connection of up to 32 CAN sensors on each BUS. |
Relay outputs | 4x C13 230V/10A power sockets |
Built-in sensors |
Temperature sensor (1%), Power supply voltage sensor (1%) |
Dry contacts input | x2 |
12V outlets | 2x 0.25A |
EXTERNAL MEMORY | |
Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
FEATURES | |
Installation | 19" cabinet |
Dimensions | (LxHxW) 440 x 44.45 (1U) x 79 mm |
Operating characteristics |
Humidity - Min. 5% - Max. 95% (Non-Condensing), Temperature - Min. -10° C - Max.80° C |
Net weight | 1,5 kg |
Supply includes |
EU Schuko C12 0.75 мм2 230V 10A cable, IEC C13 Socket to IEC C14 Plug Power Cord, Self-adhesive rubber foot 4 pcs, Warranty card, Short description and connection guide, Patch cable RJ-45 1m, Terminal plug 3 pins 3.5mm 1pcs, Terminal plug 3 pins 3.81mm 1pcs, Terminal plug 2 pins 3.81mm 1pc, 19" mounting brackets 2pcs, Screws 6pcs M3 8mm |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring |
Web, SNMP, manual SMS (GSM modem art. VT740 #03105 is ordered separately!) |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
HTTP; HTTPS; DynDNS; SSL; SNMP v1, v2c, v3; SMTP; FTP; Syslog; RADIUS; OpenVPN |
OS | Linux 6.2 |
Processor | dual-core CortexTM-A7 720 MHz / 128 MB |
Software | Built-in software for events processing. |
Alert type |
FTP, syslog, SMTP or SNMP, SMS (LTE modem art. VT740 #03108 is ordered separately!) |
Pings | Built-in ping |
LEDs |
STATUS, E1, E2, ERR, 4x OUTLET |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
POWER | |
Power input | IEC C20 240V x 16A. Fuse protection. |
Power output | 8x C13 240V |
Power consumption | 10W |
INPUTS/OUTPUTS | |
Ethernet | 100Mbit |
Mini USB AB | USB 2.0 HS |
Analog port | 2x 6P4C for connection of any analog sensor. |
CAN BUS | 1 x 6P6C for connection of up to 32 CAN sensors on each BUS. |
Relay outputs | 8x C13 230V/10A power sockets |
Built-in sensors |
Temperature sensor (1%), Power supply voltage sensor (1%) |
Dry contacts input | x2 |
12V outlets | 2x 0.25A |
EXTERNAL MEMORY | |
Micro SD card |
Micro SD card slot (SDXC up to 512 Gb - saving logs, record video, run software, databases and scripts) |
FEATURES | |
Installation | 19" cabinet |
Dimensions | (LxHxW) 440 x 44.45 (1U) x 79 mm |
Operating characteristics |
Humidity - Min. 5% - Max. 95% (Non-Condensing), Temperature - Min. -10° C - Max.80° C |
Net weight | 1,5 kg |
Supply includes |
EU Schuko C20 0.75 мм2 230V 10A cable, 2x IEC C13 Socket to IEC C14 Plug Power Cord, Self-adhesive rubber foot 4 pcs, Warranty card, Short description and connection guide, Patch cable RJ-45 1m, Terminal plug 3 pins 3.5mm 1pcs, Terminal plug 3 pins 3.81mm 1pcs, Terminal plug 2 pins 3.81mm 1pc, 19" mounting brackets 2pcs, Screws 6pcs M3 8mm |
Warranty | 3 years |
REMOTE CONTROL | |
---|---|
IP monitoring | Web, SNMP |
Sensors control | Administrative 3-level control of sensors using login |
INTERFACE & PROTOCOL SUPPORT | |
Interface | Access via any Internet browser. |
LAN | Ethernet 10/100Mbit |
Network protocols |
DHCP; HTTP; HTTPS; DynDNS; SNMP v1, v2c, v3; SMTP; FTP; Syslog; TLS; RADIUS; SSL; NTP and OpenVPN client |
OS | Linux v.6.2 |
Processor | 600 mHz |
RAM | 128 Mb |
Software | Built-in software for events processing. |
Pings | Built-in ping |
LEDs |
LINK, CAN, ACT, E1, E2, ERROR, ALARM |
Clock | Built-in clock with time synchronization |
Watchdog | Built-in watchdog timer |
Maximum number of sensors | 70 |
Maximum number of elements | 700 |
POWER | |
Power req | 1x 12V DC |
Power consumption | 6 W |
INLETS/OUTLETS | |
Ethernet | 100Mbit |
Micro USB AB | USB 2.0 micro |
Analog port | 4x6P4C for connecting any analog sensor. |
CAN BUS | –1x6P6C for connection of max 10 CAN. Fuse protection on each line.-- |
Alarm relay | 2 x 12V 0.25A alarm port for VT103 Alarm Beacon (#08264) or VT105 (#08344) |
Dry contact inputs | 2x digital inputs |
EXTERNAL MEMORY | |
Micro SD card | micro SD (SDXC do 64 Gb) |
FEATURES | |
Installation | desktop |
Dimensions | (WxHxD) 150mm x 29mm x 100mm |
Net weight | 0,5 kg |
Working temperature | Min. -10° C - Max. 80° C |
Supply includes |
Monitoring unit, 12VDC power supply, RJ-45 1m patch cable, manual, warranty, plugs, 4 self-adhesive rubber legs. |
Warranty | 3 years |
Connection |
Plug 220V is put into the outlet necessary for measurement of 220V. Cable's USB connector must be connected to the USB output, connector RJ-11 must be connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. |
---|---|
Set includes | Sensor and USB RJ-11 patch cable (1.8 m). |
Voltage measured | 90-250V |
Accuracy of measurement | 2% |
Max. distance m | 100m |
Net weight | 125g |
Dimensions (LHW) | 63×66×40mm |
Page 1 of 7
|