This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
High-Technologies Supplier
Wednesday, 5 February
[Log In]
EN50155
EN50155 Ethernet Switches, Media Converters, Wireless Access Points, Wireless Router 4G for Rolling Stock and Railway
Items tagged as

EN50155:
  • Communication for industry
    • Industrial Switches
      • » GIGABIT ETHERNET / MANAGED SWITCHES
          #08158

          Managed switch, 3x 10/1000 RJ-45 + 2x1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-3032GC)

          IGS-3032GC is a full gigabit managed Redundant Ring Ethernet switch with 3x10/100/1000Base-T(X) and 2xGigabit combo ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 20ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology.
          IGS-3032GC can be managed centralized and convenient by a powerful windows utility - Open-Vision.
          The redundant DC power inputs guarantee a non-stop operation. The backup power input will take over immediately when the primary DC power input fails.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 3
          1000 Mbps SFP Ports 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (9600bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 4
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 10 Gbps
          Max. Number of Available VLANs 256
          Number of VLAN IDs VID 1 to 4094
          IGMP multicast groups 256
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring,
          Open-Ring,
          O-RSTP
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100TX RJ45 port indicator Green for port Link/Act,
          Yellow for Duplex/Collision
          1000X / Fiber port Indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Triple DC inputs +12 ~ +48VDC or -12 ~ -48VDC on 7-pin terminal block,
          12 ~ 45VDC on power jack
          Power consumption (typical) 10W
          Overload current protection present
          Reverse polarity protection present on terminal block
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 54.1mm x 106.1mm x 145.4mm
          Weight 1022g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-14÷140°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 3x 10/1000 RJ-45 + 2x1000 SFP w/DDM, O/Open-Ring <20ms (ORing IGS-3032GC)
          for special orders only
          Net Price: 552.00 USD
          product card»
          #07909

          Managed switch, 8x 10/1000 RJ-45 + 4x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9084GP)

          IGS-9084GP is managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 4x100/1000Base-X SFP ports. The switch is designed for Railway application and fully compliant with the requirement of EN50155/EN50121-4 standard. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-9084GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. In addition, with its rugged design for railway certification, i.e., EN50155/EN50121-4 standard, make IGS-9084GP to be solid and reliable for railway traffic communication and transportation application. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 8
          100/1000 Mbps SFP Ports 4
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 24 Gbps
          Max. Number of Available VLANs 256
          Number of VLAN IDs VID 1 to 4094
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
          Amber for 10/100Mbps Link/Act
          100/1000Base-X SFP port Indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
          Power consumption (typical) 12.5W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 1070g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-14÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS IEC61000-4-2 (ESD),
          IEC61000-4-3 (RS),
          IEC61000-4-4 (EFT),
          IEC61000-4-5 (Surge),
          IEC61000-4-6 (CS),
          IEC61000-4-8,
          IEC61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          IGS-9084GP-FB2-MM - version with bypass MM
          IGS-9084GP-FB2-SS - version with bypass SS
          Managed switch, 8x 10/1000 RJ-45 + 4x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9084GP)
          for special orders only
          Net Price: 1 020.00 USD
          product card»
          #07912

          Managed switch, 12x 10/1000 RJ-45 + 2x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9042GP)

          ORing’s managed Ethernet switches are designed for industrial applications, such as rolling stock and vehicle applications. IGS-9122GP is managed redundant ring Ethernet switch with 12x10/100/1000Base-T(X) copper ports and 2x100/1000Base-X SFP ports. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) 、Open-Ring 、O-Chain、MRP and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40°C to 75°C. IGS-9122GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed Ethernet application.
          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 12
          100/1000 Mbps SFP Ports 2
          RS-232 Serial Console Port RS-232 in RJ45 connector with console cable (115200bps 8 N 1)
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3z for 1000Base-X,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3x for Flow control,
          IEEE 802.3ad for LACP (Link Aggregation Control Protocol),
          IEEE 802.1D for STP (Spanning Tree Protocol),
          IEEE 802.1p for COS (Class of Service),
          IEEE 802.1Q for VLAN Tagging,
          IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol),
          IEEE 802.1x for Authentication,
          IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
          MAC Table 8192 MAC addresses
          Priority Queues 8
          Processing Store-and-Forward
          Switching latency 7 µs
          Switching bandwidth 28 Gbps
          Max. Number of Available VLANs 256
          Number of VLAN IDs VID 1 to 4094
          IGMP multicast groups 128 for each VLAN
          Port rate limiting User Define
          Security Features Enable/disable ports,
          MAC based port security,
          Port based network access control (802.1x),
          VLAN (802.1q ) to segregate and secure network traffic,
          Radius centralized password management,
          SNMPv3 encrypted authentication and access security
          Software Features STP/RSTP (IEEE 802.1D/w),
          Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units,
          TOS/Diffserv supported,
          Quality of Service (802.1p) for real-time traffic,
          VLAN (802.1Q) with VLAN tagging and GVRP supported,
          IGMP Snooping for multicast filtering,
          Port configuration,
          Port status,
          Port statistics,
          Port monitoring,
          Port security
          Network Redundancy STP,
          RSTP,
          MSTP,
          O-Ring
          DDM Function Voltage,
          Current,
          Temperature
          LED Indicators
          Power / Ready indicator Green - Ready LED x 3
          Ring Master indicator Green - Indicate system operated in O-Ring Master mode
          O-Ring indicator Green - Indicate system operated in O-Ring mode
          Fault indicator Amber - Indicate unexpected event occurred
          10/100/1000Base-T(X) RJ45 port indicator Green for port 1000Mbps Link/Act,
          Amber for 10/100Mbps Link/Act
          100/1000Base-X SFP port Indicator Green for port Link/Act
          Fault contact
          Relay Relay output to carry capacity of 1A at 24VDC
          Power
          Input power Dual DC inputs. 12÷48VDC on 6-pin terminal block
          Power consumption (typical) 12.67W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x D x H) 74.3mm x 109.2mm x 153.6mm
          Weight 765g
          Environmental
          Storage Temperature -40÷85°C(-40÷185°F)
          Operating Temperature -40÷70°C (-14÷158°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS IEC61000-4-2 (ESD),
          IEC61000-4-3 (RS),
          IEC61000-4-4 (EFT),
          IEC61000-4-5 (Surge),
          IEC61000-4-6 (CS),
          IEC61000-4-8,
          IEC61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950
          Warranty
          Warranty period 5 years
          Managed switch, 12x 10/1000 RJ-45 + 2x100/1000 SFP w/DDM, O/Open-Ring <30ms (ORing IGS-9042GP)
          for special orders only
          Net Price: 1 030.00 USD
          product card»
    • Industrial Media Converters
      • » GIGABIT ETHERNET MEDIA CONVERTERS
          #07964

          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)

          Physical Ports
          10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX with PoE (PSE) 1
          1000Base-FX (SFP) 1
          Processing Store-and-Forward
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X) and 100BaseFX,
          IEEE 802.3x for Flow control,
          IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
          DIP-Switch setting DIP-Switch 1 for LFP mode selection - (ON) enable / (OFF) disable,
          DIP-Switch 2 for Ethernet speed selection - (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate,
          DIP-Switch 3 for Ethernet full/half duplex selection - (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate,
          DIP-Switch 4 for fiber full/half duplex selection - (ON) Half-Duplex / (OFF) Full-Duplex
          LED Indicators
          Power indicator Green - Power LED x 2 ( (ON) power input on-line / (OFF) power input off-line)
          10/100TX RJ45 port indicator Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down,
          Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps,
          Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          100Base-FX fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
          LFP statue indicator Amber LED – (ON) LFP function fail / (OFF) LFP function disable
          PoE indicator Amber for P.S.E. indicator
          Power
          Input power Dual 50~57 VDC voltage power inputs at 4-pin terminal block
          Power consumption (typical) 4 Watts (P.S.E. output included)
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension 40mm x 70mm x 95mm
          Weight 291g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷75°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Recommended power supply: #06676 Power supply 40W 24VDC, mini, DIN TS35 (Mean Well MDR-40-24).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Industrial mini type Ethernet to fiber PoE media converter LFP with 1x10/1000Base-T(X) P.S.E. and 1x1000Base-FX, SFP socket (ORing IGPMC-111GP)
          Net Price: 176.00 USD
          product card»
      • » EN50155 COMPATIBLE CONVERTERS
          #07647

          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) (ORing IGMC-111GPB)

          Physical Ports
          100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-FX SFP ports 1
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          LED Indicators
          Power / Ready indicator Green LED x 2 (ON) power input on-line / (OFF) power input off-line
          100/1000TX RJ45 port indicator LED for Link/Act and Speed indicator,
          Green on only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green and Amber on - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          If amber on only - 10Mbps (This is not working mode)
          100/1000X Port Indicator Green for port Link/Act
          Power
          Input power Dual DC inputs. 12÷48VDC on 4-pin terminal block
          Power consumption (typical) 3.6W
          Overload current protection present
          Reverse polarity protection present
          Physical Characteristic
          Enclosure IP-30
          Dimension (W x H x D) 26.1mm x 70mm x 95mm
          Weight 190g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -40÷70°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) (ORing IGMC-111GPB)
          Net Price: 184.00 USD
          product card»
      • » CARD TYPE CONVERTERS AND CHASSIS
          #08443

          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) card type (ORing RGMC-111GPB)

          RGMC-111GPB is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000 (#08437). RGMC-111GPB is a cost-effective solution for the conversion between 100/1000Base-T(X) and 100/1000Base-X SFP interface, it allows you to extend communication distance by optical fiber. RGMC-111GPB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Therefore, the RGMC-111GPB to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.
          Physical Ports
          100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 1
          100/1000Base-FX SFP port 1
          Technology
          Ethernet Standards IEEE 802.3u for 100Base-TX and 100Base-FX,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3z for 1000Base-X
          Processing Store-and-Forward
          DIP-Switch 1/2 DIP-Switch 1 (ON) and DIP-Switch 2 (ON) - SFP speed setting to 100Mbps,
          DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) - SFP speed setting to 1000Mbps
          LED Indicators
          Power indicator Green Power LED x 1
          10/100Base-T(X) RJ45 port indicator Green only - 1000Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down,
          Green and Amber - 100Mbps Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
          *Note - If amber on only - 10Mbps (This is not avail mode)
          100/1000Base-(F)X fiber port indicator Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
          Power
          Power consumption (typical) 3.6W
          Overload current protection present
          Physical Characteristic
          Dimension (W x H x D) 21.8mm x 66.5mm x 126mm
          Weight 125g
          Environmental
          Storage Temperature -40÷85°C
          Operating Temperature -10÷60°C
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Warranty
          Warranty period 2 years
          Recommended power supply: #06674 Power supply 10W 24VDC, mini, DIN TS35 (Mean Well MDR-10-24).
          In order to optimize the selection of SFP modules, please contact our Sales Department.
          Media converter 1x 100/1000TX (RJ-45) + 1x 100/1000FX (SFP) card type (ORing RGMC-111GPB)
          for special orders only
          Net Price: 184.00 USD
          product card»
    • Transporter EN50155 Devices
        #06506

        Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE (ORing TINJ-101GT-M12-24V)

        ORing’s Transporter series PoE Injectors are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TINJ-101GT-M12-24V PoE Injector is an advanced IEEE802.3at compliant device with Intelligent Detection that provided 1-port 10/100/1000 Base-T(X) PoE output which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TINJ-101GT-M12-24V EN50155 PoE Injector use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Because of this intelligent detection, only an IEEE 802.3at/802.3af compliant device can be powered with the TINJ-101GT-M12-24V PoE Injector. Typically, in Ethernet networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 50V insertion, the installer doesn’t need to worry about voltage drops caused by cable length. The TINJ-101GT-M12-24V PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
        Physical Ports
        10/100/1000 Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX 1 (8-pin M12 female A-coding connector)
        10/100/1000 Base-T(X) Port in M12 Auto MDI/MDIX 1 (8-pin M12 female A-coding connector)
        Operating Voltage
        Input Voltage Railway 24VDC (12 ~ 57 VDC) on 5-pin M12 female A-coding
        Output Power 50V / 600mA,
        30 Watts max. Per port
        LED Indicators
        Power indicator PWR / Ready 1 x LED,
        Green On - Power is on and functioning Normally
        PoE Indicators 1 x LED,
        Blue On - PoE Device Link,
        Blue Blinking - Detecting PoE Device,
        Blue Off - None PoE Device Detected
        Protection
        Short Circuit Protection present
        Over Load Protection present
        Physical Characteristic
        Enclosure IP-40
        Dimension (W x D x H) 88.9 x 40 x 178.2 mm
        Weight 446g
        Environmental
        Storage Temperature -40÷80°C(-40÷176°F)
        Operating Temperature -25÷75°C (-13÷167°F)
        Operating Humidity 5%÷90% Non-condensing
        Regulatory approvals
        EMC CE EMC (EN 55024,
        EN 55032),
        FCC Part 15 B,
        EN 50155(EN 50121-1,
        EN 50121-3-2)
        EMI EN 55032,
        CISPR32,
        EN 61000-3-2,
        EN 61000-3-3,
        FCC Part 15 B class A
        EMS IEC/EN 61000-4-2 (ESD),
        IEC/EN 61000-4-3 (RS),
        IEC/EN 61000-4-4 (EFT),
        IEC/EN 61000-4-5 (Surge),
        IEC/EN 61000-4-6 (CS),
        IEC/EN 61000-4-8(PFMF),
        IEC/EN 61000-4-11 (DIP))
        Shock IEC60068-2-27
        Free Fall IEC60068-2-31
        Vibration IEC60068-2-6
        Safety EN60950-1
        Other EN 50155
        MTBF 2,761,341 hrs.
        Warranty
        Warranty period 5 years
        Industrial Gigabit High Power Injector, 2x10/1000 M12 PoE (ORing TINJ-101GT-M12-24V)
        for special orders only
        Net Price: 343.00 USD
        product card»
      • » UNMANAGED SWITCHES
          #06630

          Unmanaged switch, 5x 10/100/500 M12 PoE (ORing TXPS-141XT-M12-24V)

          ORing’s TransporterTM series Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. TXPS-141XT-M12 series are unmanaged PoE Ethernet switch with 4x10/100/500Base-T(X) P.S.E. ports and 1x10/100/500Base-T(X) port which is compliant with EN50155 requirement. It is specifically designed for the toughest industrial environments. TXPS-141XT-M12 series EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. TXPS-141XT-M12 series also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. TXPS-141XT-M12 series switch has 4x10/100/500Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. The very wide operating temperature range from -40 oC to 75oC can satisfy most operating environment.
          Physical Ports
          10/100/500Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX 4
          10/100/500Base-T(X) Port in M12 Auto MDI/MDIX 1
          Connector Type M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 1
          10/100/500Base-T(X) M12 port indicator and PoE indicator Top for port Link/Act indicator. Green for 10/100Mbps link,
          Middle Green for 500Mbps port Link/Act indicator,
          Bottom blue for PoE Injected indicator
          10/100/500Base-T(X) M12 port indicator Top Green for port Link/Act at 10/100Mbps,
          Bottom Green for port Link/Act at 500Mbps
          Power
          Redundant Input Power 12~57VDC power input on M12 female connector (5-pin M12 A-coding)
          Power consumption (typical) 2W
          PoE Output Power 60W (12~24VDC) / 120W (24~57VDC)
          Overload current protection present
          Reverse polarity protection Present
          Physical Characteristic
          Dimension (W x D x H) 88.9 x 55 x 178.2 mm
          Weight 643 g
          Environmental
          Enclosure IP-30
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMI FCC Part 15,
          CISPR (EN55022) class A,
          EN50155 (EN50121-3-2,
          EN55011,
          EN50121-4)
          EMS EN61000-4-2 (ESD),
          EN61000-4-3 (RS),
          EN61000-4-4 (EFT),
          EN61000-4-5 (Surge),
          EN61000-4-6 (CS),
          EN61000-4-8,
          EN61000-4-11
          Shock IEC60068-2-27,
          EN61373
          Free Fall IEC60068-2-32
          Vibration IEC60068-2-6
          Safety EN60950-1
          Warranty
          Warranty period 5 years
          Unmanaged switch, 5x 10/100/500 M12 PoE (ORing TXPS-141XT-M12-24V)
          for special orders only
          Net Price: 584.00 USD
          product card»
          #07850

          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-24V)

          ORing's TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGXPS-1080-M12-24V is an un-managed PoE Ethernet switch with 8x10/100/500/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGXPS-1080-M12-24V also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGXPS-1080-M12-24V switch has 8X10/100/500/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGXPS-1080-M12-24V EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
          While installing in the train, TGXPS-1080-M12-24V is mainly used for in-train monitoring and Entertainment service due to its high speed Gigabit Ethernet
          connection and PoE capability. Devices connected will be IP camera or CCTV for the use of train surveillance. As an unmanaged Ethernet Switch, TGXPS-1080-M12-24V is not able and will not be used for any control related application. Its main function is simply forwarding the Ethernet packet from one Ethernet based device to another Ethernet device which are all connected to the Switch.
          Physical Ports
          10/100/1000 Base-T(X) Auto MDI/MDIX ports 8
          Connector Type M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
          MAC Table 4k
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 3
          Fault Indicator Amber Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) M12 port indicator and PoE indicator Top for port Link/Act indicator. Green for 1000Mbps link,
          Amber for 10/100 Mbps link,
          Middle Amber for 500Mbps port Link/Act indicator,
          Bottom blue for PoE Injected indicator
          Fault contact
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Redundant Input Power Dual 24 (12~57VDC)VDC on 5-pin M23 connector
          Power consumption (typical) 8W
          PoE Output Power 60W (12~24VDC) / 120W (24~57VDC)
          Overload current protection present
          Reverse polarity protection Present
          Physical Characteristic
          Dimension (W x D x H) 125 x 65 x 196 mm
          Weight 979 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC CE EMC (EN 55024,
          EN 55032),
          FCC Part 15B,
          EN 50121-3-2 (EN 50155)
          EMI EN 55032,
          CISPR32,
          EN 61000-3-2,
          EN 61000-3-3,
          FCC Part 15B class A
          EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
          IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
          IEC/EN 61000-4-5 (Surge),
          IEC/EN 61000-4-6 (CS),
          IEC/EN 61000-4-8(PFMF),
          IEC/EN 61000-4-11 (DIP))
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          Safety EN60950-1
          Other EN 50155
          MTBF 442602 hrs
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-24V)
          for special orders only
          Net Price: 766.00 USD
          product card»
          #07851

          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-MV)

          ORing’s TransporterTM series un-managed Ethernet switches are designed for industrial applications, such as rolling stock, vehicle, and railway applications. The TGXPS-1080-M12-MV is an un-managed PoE Ethernet switch with 8x10/100/500/1000Base-T(X) P.S.E. which is specifically designed for the toughest and fully compliant with EN50155 requirement. TGXPS-1080-M12-MV also supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each TGXPS-1080-M12-MV switch has 8X10/100/500/1000Base-T(X) IEEE 802.3af/at P.S.E. (Power Sourcing Equipment) ports, but the PoE total power budget is 60Watts Max. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. TGXPS-1080-M12-MV EN50155 Ethernet switch use M12 connectors to ensure tight, robust connections, and guarantee reliable operation against environmental disturbances, such as vibration and shock. In addition, the wide operating temperature range from -40oC to 75oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for rolling stock and highly-managed PoE Ethernet application.
          While installing in the train, TGXPS-1080-M12-MV is mainly used for in-train monitoring and Entertainment service due to its high-speed Gigabit Ethernet connection and PoE capability. Devices connected will be IP camera or CCTV for the use of train surveillance. As an unmanaged Ethernet Switch, TGXPS-1080-M12-MV is not able and will not be used for any control related application. Its main function is simply forwarding the Ethernet packet from one Ethernet based device to another Ethernet device which are all connected to the Switch.
          Physical Ports
          10/100/1000 Base-T(X) Auto MDI/MDIX ports 8
          Connector Type Waterproof M12
          Technology
          Ethernet Standards IEEE 802.3 for 10BaseT,
          IEEE 802.3u for 100BaseT(X),
          IEEE 802.3x for Flow control,
          IEEE 802.3ab for 1000Base-T,
          IEEE 802.3at compliant PoE specification (Maximum 30Watts per port)
          MAC Table 4k
          Processing Store-and-Forward
          LED Indicators
          Power / Ready indicator Green Power LED x 1
          Fault Indicator Amber Indicate PWR1 or PWR2 failure
          10/100/1000Base-T(X) M12 port indicator and PoE indicator Top for port Link/Act indicator. Green for 1000Mbps link,
          Amber for 10/100 Mbps link,
          Middle Amber for 500Mbps port Link/Act indicator,
          Bottom blue for PoE Injected indicator
          Fault contact
          Relay Relay output to carry capacity of 3A at 24VDC on M12 connector (5-pin A-coding)
          Power
          Redundant Input Power 72/110 (50.4-137.5) VDC on 5-pin 7/8-inch male connector
          Power consumption (typical) 8W
          PoE Output Power 60W (12~24VDC) / 120W (24~57VDC)
          Overload current protection present
          Reverse polarity protection Present
          Physical Characteristic
          Dimension (W x D x H) 150 x 65 x 196 mm
          Weight 1320 g
          Environmental
          Storage Temperature -40÷85°C (-40÷185°F)
          Operating Temperature -40÷75°C (-40÷167°F)
          Operating Humidity 5%÷95% Non-condensing
          Regulatory approvals
          EMC CE EMC (EN 55024,
          EN 55032),
          FCC Part 15B,
          EN 50121-3-2 (EN 50155)
          EMI EN 55032,
          CISPR32,
          EN 61000-3-2,
          EN 61000-3-3,
          FCC Part 15B class A
          EMS EN 55024 (IEC/EN 61000-4-2 (ESD),
          IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT),
          IEC/EN 61000-4-5 (Surge),
          IEC/EN 61000-4-6 (CS),
          IEC/EN 61000-4-8(PFMF),
          IEC/EN 61000-4-11 (DIP))
          Shock IEC60068-2-27
          Free Fall IEC60068-2-31
          Vibration IEC60068-2-6
          Safety EN60950-1
          Other EN 50155
          MTBF 229943 hrs
          Warranty
          Warranty period 5 years
          Unmanaged switch, 8x 10/100/1000 M12 PoE (ORing TGXPS-1080-M12-MV)
          for special orders only
          Net Price: 1 340.00 USD
          product card»


top

Page 1 of 2
$ €