MENU
#06669
Power supply 60W 48VDC, DIN TS35 (Mean Well HDR-60-48)
| Output | |
|---|---|
| DC Voltage | 48V |
| Rated current | 1.25A |
| Current Range | 0÷1.25A |
| Rated Power | 60W |
| Ripple & noise (max.) | 240mVp-p |
| Voltage adjustment range | 43.2÷55.2V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±1.0% |
| Load regulation | ±1.0% |
| Input | |
| Voltage range |
85÷264VAC, 120÷370VDC |
| Efficiency (typ.) | 91% |
| Protection | |
| Overload |
105%÷160% rated output power, protection type - constant current limiting - recovers automatically |
| Overvoltage |
115%÷150%, protection type - shut down & re-power on to recover |
| Environment | |
| Working temperature | -30°C ÷ 70°C |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Safety & EMC | |
| Safety standards |
UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, EAC Tp TC 040, BSMI CNS14336-1 approved |
| Withstand voltage | I/P-O/P 4kVAC |
| EMC Standards |
EN55032 class B, EN61000-3-2,33, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11, EN61204-3 |
| Others | |
| MTBF | min. 441500h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 52.5mm x 90mm x 5.5mm |
#06694
Power supply 100W 24VDC, DIN TS35 (Mean Well HDR-100-24)
| Output | |
|---|---|
| DC Voltage | 24V |
| Rated current | 3,83A |
| Current Range | 0÷3,83A |
| Rated Power | 100W |
| Ripple & noise (max.) | 150mVp-p |
| Voltage adjustment range | 21.6÷29.0V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±1.0% |
| Load regulation | ±1.0% |
| Input | |
| Voltage range |
85÷264VAC, 120÷370VDC |
| Efficiency (typ.) | 90% |
| Protection | |
| Overload |
102%÷110% rated output power, protection type - constant current limiting - recovers automatically |
| Environment | |
| Working temperature | -30°C ÷ 70°C |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Safety & EMC | |
| Safety standards |
UL60950-1, IEC60950-1 approved, UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, EAC Tp TC 040, BSMI CNS14336-1 approved |
| Withstand voltage | I/P-O/P 3kVAC |
| EMC Standards |
EN55032 class B, EN61000-3-2,33, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11 |
| Others | |
| Dimension (W x H x D) | 70mm x 90mm x 54.5mm |
#06670
Power supply 100W 48VDC, DIN TS35 (Mean Well HDR-100-48)
| Output | |
|---|---|
| DC Voltage | 48V |
| Rated current | 1.92A |
| Current Range | 0÷1.92A |
| Rated Power | 100W |
| Ripple & noise (max.) | 240mVp-p |
| Voltage adjustment range | 48.0÷48.7V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±1.0% |
| Load regulation | ±1.0% |
| Input | |
| Voltage range |
85÷264VAC, 120÷370VDC |
| Efficiency (typ.) | 90% |
| Protection | |
| Overload |
102%÷110% rated output power, protection type - constant current limiting - recovers automatically |
| Environment | |
| Working temperature | -30°C ÷ 70°C |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Safety & EMC | |
| Safety standards |
UL60950-1, IEC60950-1 approved, UL62368-1, UL508, TUV EN61558-2-16, IEC62368-1, EAC Tp TC 040, BSMI CNS14336-1 approved |
| Withstand voltage | I/P-O/P 3kVAC |
| EMC Standards |
EN55032 class B, EN61000-3-2,33, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11 |
| Others | |
| Dimension (W x H x D) | 70mm x 90mm x 54.5mm |
#08396
Power supply 120W 24VDC, DIN TS35, P.F.C. (Mean Well SDR-120-24)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
| Output | |
|---|---|
| DC Voltage | 24V |
| Rated current | 5A |
| Current Range | 0÷5A |
| Rated Power | 120W |
| Ripple & noise (max.) | 100mVp-p |
| Voltage adjustment range | 24÷28V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±0.5% |
| Load regulation | ±1.0% |
| Setup & rise time |
1500ms & 60ms/230VAC at full load, 3000ms & 40ms/115VAC at full load |
| Hold up time (typ.) |
20ms/230VAC at full load, 20ms/115VAC at full load |
| Input | |
| Voltage range |
88÷264VAC, 124÷370VDC |
| Frequency range | 47÷63Hz |
| Power factor (typ.) |
0.93/230VAC at full load, 0.96/115VAC at full load |
| Efficiency (typ.) | 91% |
| AC current (typ.) |
1.4A/115VAC, 0.7A/230VAC |
| Inrush current (typ.) |
35A/115VAC cold start, 70A/230VAC cold start |
| Leakage current | <1mA/240VAC |
| Protection | |
| Overload |
110%÷150% rated output power, protection type - constant current limiting - recovers automatically after fault condition is removed |
| Overvoltage |
29÷33V, protection type - shut down o/p voltage & re-power on to recover |
| Over temperature |
95°C ±5°C (TSW1) detect on heatsink of power transistor, protection type - shut down o/p voltage & re-power on to recover |
| Environment | |
| Working temperature | -25°C ÷ 70°C |
| Working humidity | 20÷95% RH non-condensing |
| Storage temperature | -40°C ÷ 85°C |
| Storage Humidity | 10÷95% RH |
| Temperature coefficient | ±0.03%/°C (0÷50°C) |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Vibration (mounting) | compliance to IEC60068-2-6 |
| Safety & EMC | |
| Safety standards |
UL508, UL60950-1, TUV EN60950-1 |
| Withstand voltage |
I/P-O/P 3kVAC, I/P-FG 1.5kVAC, O/P-FG 0.5kVAC |
| Isolation resistance |
I/P-O/P 100MΩ/500VDC, I/P-FG 100MΩ/500VDC, O/P-FG 100MΩ/500VDC |
| EMI conduction & radiation |
EN55011, EN55022 (CISPR22), EN61204-3 Class B |
| Harmonic current |
EN61000-3-2, EN61000-3-3 |
| EMS immunity |
EN61000-4-2/3/4/5/6/8/11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level criteria A |
| Others | |
| MTBF | min. 289900h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 40mm x 125,2mm x 113,5mm |
| Weight | 0,67kg |
#06695
Power supply 150W 24VDC, DIN TS35 (Mean Well HDR-150-24)
| Output | |
|---|---|
| DC Voltage | 24V |
| Rated current | 6,25A |
| Current Range | 0÷6,2A |
| Rated Power | 150W |
| Ripple & noise (max.) | 150mVp-p |
| Voltage adjustment range | 21.6÷29.0V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±1.0% |
| Load regulation | ±1.0% |
| Input | |
| Voltage range |
85÷264VAC, 120÷370VDC |
| Efficiency (typ.) | 90,5% |
| Protection | |
| Overload |
105%÷130% rated output power, protection type - constant current limiting - recovers automatically |
| Environment | |
| Working temperature | -30°C ÷ 70°C |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Safety & EMC | |
| Safety standards |
IEC62368-1, UL62368-1, UL61010, TUV EN61558-2-16, IEC62368-1, EAC TP TC 004 approved, Design refer to En0178, TUV EN62368-1 |
| Withstand voltage | I/P-O/P 4kVAC |
| EMC Standards |
EN55032 class B, EN61000-3-2,33, EN61000-6-2, EN61000-4-2,3,4,5,6,8,11 |
| Others | |
| Dimension (W x H x D) | 105mm x 90mm x 54.5mm |
#08398
Power supply 240W 24VDC, DIN TS35, P.F.C. (Mean Well SDR-240-24)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
| Output | |
|---|---|
| DC Voltage | 24V |
| Rated current | 10A |
| Current Range | 0÷10A |
| Rated Power | 240W |
| Ripple & noise (max.) | 100mVp-p |
| Voltage adjustment range | 24÷28V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±0.5% |
| Load regulation | ±1.0% |
| Setup & rise time |
1500ms & 60ms/230VAC at full load, 3000ms & 40ms/115VAC at full load |
| Hold up time (typ.) |
20ms/230VAC at full load, 20ms/115VAC at full load |
| Input | |
| Voltage range |
88÷264VAC, 124÷370VDC |
| Frequency range | 47÷63Hz |
| Power factor (typ.) |
0.93/230VAC at full load, 0.96/115VAC at full load |
| Efficiency (typ.) | 94% |
| AC current (typ.) |
2.6A/115VAC, 1.3A/230VAC |
| Inrush current (typ.) |
33A/115VAC cold start, 65A/230VAC cold start |
| Leakage current | <1mA/240VAC |
| Protection | |
| Overload |
110%÷150% rated output power, protection type - constant current limiting - recovers automatically after fault condition is removed |
| Overvoltage |
29÷33V, protection type - shut down o/p voltage & re-power on to recover |
| Over temperature |
95°C ±5°C (TSW1) detect on heatsink of power transistor, protection type - shut down o/p voltage & re-power on to recover |
| Environment | |
| Working temperature | -25°C ÷ 70°C |
| Working humidity | 20÷95% RH non-condensing |
| Storage temperature | -40°C ÷ 85°C |
| Storage Humidity | 10÷95% RH |
| Temperature coefficient | ±0.03%/°C (0÷50°C) |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Vibration (mounting) | compliance to IEC60068-2-6 |
| Safety & EMC | |
| Safety standards |
UL508, UL60950-1, TUV EN60950-1 |
| Withstand voltage |
I/P-O/P 3kVAC, I/P-FG 1.5kVAC, O/P-FG 0.5kVAC |
| Isolation resistance |
I/P-O/P 100MΩ/500VDC, I/P-FG 100MΩ/500VDC, O/P-FG 100MΩ/500VDC |
| EMI conduction & radiation |
EN55011, EN55022 (CISPR22), EN61204-3 Class B |
| Harmonic current |
EN61000-3-2, EN61000-3-3 |
| EMS immunity |
EN61000-4-2/3/4/5/6/8/11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level criteria A |
| Others | |
| MTBF | min. 169300h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 63mm x 125,2mm x 113,5mm |
| Weight | 1,03kg |
#08399
Power supply 240W 48VDC, DIN TS35, P.F.C. (Mean Well SDR-240-48)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
| Output | |
|---|---|
| DC Voltage | 48V |
| Rated current | 5A |
| Current Range | 0÷5A |
| Rated Power | 240W |
| Ripple & noise (max.) | 120mVp-p |
| Voltage adjustment range | 48÷55V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±0.5% |
| Load regulation | ±1.0% |
| Setup & rise time |
1500ms & 60ms/230VAC at full load, 3000ms & 40ms/115VAC at full load |
| Hold up time (typ.) |
20ms/230VAC at full load, 20ms/115VAC at full load |
| Input | |
| Voltage range |
88÷264VAC, 124÷370VDC |
| Frequency range | 47÷63Hz |
| Power factor (typ.) |
0.93/230VAC at full load, 0.96/115VAC at full load |
| Efficiency (typ.) | 94% |
| AC current (typ.) |
2.6A/115VAC, 1.3A/230VAC |
| Inrush current (typ.) |
33A/115VAC cold start, 65A/230VAC cold start |
| Leakage current | <1mA/240VAC |
| Protection | |
| Overload |
110%÷150% rated output power, protection type - constant current limiting - recovers automatically after fault condition is removed |
| Overvoltage |
56÷65V, protection type - shut down o/p voltage & re-power on to recover |
| Over temperature |
95°C ±5°C (TSW1) detect on heatsink of power transistor, protection type - shut down o/p voltage & re-power on to recover |
| Environment | |
| Working temperature | -25°C ÷ 70°C |
| Working humidity | 20÷95% RH non-condensing |
| Storage temperature | -40°C ÷ 85°C |
| Storage Humidity | 10÷95% RH |
| Temperature coefficient | ±0.03%/°C (0÷50°C) |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Vibration (mounting) | compliance to IEC60068-2-6 |
| Safety & EMC | |
| Safety standards |
UL508, UL60950-1, TUV EN60950-1 |
| Withstand voltage |
I/P-O/P 3kVAC, I/P-FG 1.5kVAC, O/P-FG 0.5kVAC |
| Isolation resistance |
I/P-O/P 100MΩ/500VDC, I/P-FG 100MΩ/500VDC, O/P-FG 100MΩ/500VDC |
| EMI conduction & radiation |
EN55011, EN55022 (CISPR22), EN61204-3 Class B |
| Harmonic current |
EN61000-3-2, EN61000-3-3 |
| EMS immunity |
EN61000-4-2/3/4/5/6/8/11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level criteria A |
| Others | |
| MTBF | min. 169300h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 63mm x 125,2mm x 113,5mm |
| Weight | 1,03kg |
#08397
Power supply 120W 48VDC, DIN TS35, P.F.C. (Mean Well SDR-120-48)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
| Output | |
|---|---|
| DC Voltage | 48V |
| Rated current | 2.5A |
| Current Range | 0÷2.5A |
| Rated Power | 120W |
| Ripple & noise (max.) | 120mVp-p |
| Voltage adjustment range | 48÷55V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±0.5% |
| Load regulation | ±1.0% |
| Setup & rise time |
1500ms & 60ms/230VAC at full load, 3000ms & 40ms/115VAC at full load |
| Hold up time (typ.) |
20ms/230VAC at full load, 20ms/115VAC at full load |
| Input | |
| Voltage range |
88÷264VAC, 124÷370VDC |
| Frequency range | 47÷63Hz |
| Power factor (typ.) |
0.93/230VAC at full load, 0.96/115VAC at full load |
| Efficiency (typ.) | 90.5% |
| AC current (typ.) |
1.4A/115VAC, 0.7A/230VAC |
| Inrush current (typ.) |
35A/115VAC cold start, 70A/230VAC cold start |
| Leakage current | <1mA/240VAC |
| Protection | |
| Overload |
110%÷150% rated output power, protection type - constant current limiting - recovers automatically after fault condition is removed |
| Overvoltage |
56÷65V, protection type - shut down o/p voltage & re-power on to recover |
| Over temperature |
95°C ±5°C (TSW1) detect on heatsink of power transistor, protection type - shut down o/p voltage & re-power on to recover |
| Environment | |
| Working temperature | -25°C ÷ 70°C |
| Working humidity | 20÷95% RH non-condensing |
| Storage temperature | -40°C ÷ 85°C |
| Storage Humidity | 10÷95% RH |
| Temperature coefficient | ±0.03%/°C (0÷50°C) |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Vibration (mounting) | compliance to IEC60068-2-6 |
| Safety & EMC | |
| Safety standards |
UL508, UL60950-1, TUV EN60950-1 |
| Withstand voltage |
I/P-O/P 3kVAC, I/P-FG 1.5kVAC, O/P-FG 0.5kVAC |
| Isolation resistance |
I/P-O/P 100MΩ/500VDC, I/P-FG 100MΩ/500VDC, O/P-FG 100MΩ/500VDC |
| EMI conduction & radiation |
EN55011, EN55022 (CISPR22), EN61204-3 Class B |
| Harmonic current |
EN61000-3-2, EN61000-3-3 |
| EMS immunity |
EN61000-4-2/3/4/5/6/8/11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level criteria A |
| Others | |
| MTBF | min. 289900h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 40mm x 125,2mm x 113,5mm |
| Weight | 0,67kg |
#08400
Power supply 480W 24VDC, DIN TS35, P.F.C. (Mean Well SDR-480-24)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
| Output | |
|---|---|
| DC Voltage | 24V |
| Rated current | 20A |
| Current Range | 0÷20A |
| Rated Power | 480W |
| Ripple & noise (max.) | 100mVp-p |
| Voltage adjustment range | 24÷28V |
| Voltage tolerance | ±1.2% |
| Line regulation | ±0.5% |
| Load regulation | ±1.0% |
| Setup & rise time |
1500ms & 60ms/230VAC at full load, 3000ms & 40ms/115VAC at full load |
| Hold up time (typ.) |
14ms/230VAC at full load, 20ms/115VAC at full load |
| Input | |
| Voltage range |
90÷264VAC, 127÷370VDC |
| Frequency range | 47÷63Hz |
| Power factor (typ.) |
0.94/230VAC at full load, 0.99/115VAC at full load |
| Efficiency (typ.) | 94% |
| AC current (typ.) |
5A/115VAC, 2.5A/230VAC |
| Inrush current (typ.) |
40A/115VAC cold start, 80A/230VAC cold start |
| Leakage current | <0.8mA/240VAC |
| Protection | |
| Overload |
110%÷150% rated output power, protection type - constant current limiting - recovers automatically after fault condition is removed |
| Overvoltage |
29÷33V, protection type - shut down o/p voltage & re-power on to recover |
| Over temperature |
105°C ±5°C (TSW1) detect on heatsink of power transistor, protection type - shut down o/p voltage & re-power on to recover |
| Environment | |
| Working temperature | -25°C ÷ 70°C |
| Working humidity | 20÷95% RH non-condensing |
| Storage temperature | -40°C ÷ 85°C |
| Storage Humidity | 10÷95% RH |
| Temperature coefficient | ±0.03%/°C (0÷50°C) |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Vibration (mounting) | compliance to IEC60068-2-6 |
| Safety & EMC | |
| Safety standards |
UL508, UL60950-1, TUV EN60950-1 |
| Withstand voltage |
I/P-O/P 3kVAC, I/P-FG 1.5kVAC, O/P-FG 0.5kVAC |
| Isolation resistance |
I/P-O/P 100MΩ/500VDC, I/P-FG 100MΩ/500VDC, O/P-FG 100MΩ/500VDC |
| EMI conduction & radiation |
EN55011, EN55022 (CISPR22), EN61204-3 Class B |
| Harmonic current |
EN61000-3-2, EN61000-3-3 |
| EMS immunity |
EN61000-4-2/3/4/5/6/8/11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level criteria A |
| Others | |
| MTBF | min. 112900h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 85.5mm x 125.2mm x 128.5mm |
| Weight | 1.6kg |
#08401
Power supply 480W 48VDC, DIN TS35, P.F.C. (Mean Well SDR-480-48)
DIN rail Mean Well SDR series meets the highest standards and criteria, so that it can be used to work in the industrial automation systems, machine control, power, lighting and a wide range of devices.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
PSU device is enclosed in a metal housing that is resistant to low and high temperatures. Power supplies of this group can withstand a load of 150% of the rated power for 3 seconds.
The power supply is cooled by the free flow of air, making it a highly fault-free - this is a very important feature when power supply is working continuously.
| Output | |
|---|---|
| DC Voltage | 48V |
| Rated current | 10A |
| Current Range | 0÷10A |
| Rated Power | 480W |
| Ripple & noise (max.) | 120mVp-p |
| Voltage adjustment range | 48÷55V |
| Voltage tolerance | ±1.2% |
| Line regulation | ±0.5% |
| Load regulation | ±1.0% |
| Setup & rise time |
1500ms & 60ms/230VAC at full load, 3000ms & 40ms/115VAC at full load |
| Hold up time (typ.) |
14ms/230VAC at full load, 20ms/115VAC at full load |
| Input | |
| Voltage range |
90÷264VAC, 127÷370VDC |
| Frequency range | 47÷63Hz |
| Power factor (typ.) |
0.94/230VAC at full load, 0.99/115VAC at full load |
| Efficiency (typ.) | 94% |
| AC current (typ.) |
5A/115VAC, 2.5A/230VAC |
| Inrush current (typ.) |
40A/115VAC cold start, 80A/230VAC cold start |
| Leakage current | <0.8mA/240VAC |
| Protection | |
| Overload |
110%÷150% rated output power, protection type - constant current limiting - recovers automatically after fault condition is removed |
| Overvoltage |
56÷65V, protection type - shut down o/p voltage & re-power on to recover |
| Over temperature |
105°C ±5°C (TSW1) detect on heatsink of power transistor, protection type - shut down o/p voltage & re-power on to recover |
| Environment | |
| Working temperature | -25°C ÷ 70°C |
| Working humidity | 20÷95% RH non-condensing |
| Storage temperature | -40°C ÷ 85°C |
| Storage Humidity | 10÷95% RH |
| Temperature coefficient | ±0.03%/°C (0÷50°C) |
| Vibration (component) |
10÷500Hz, 2G 10min./1cycle, 60min. each along X Y Z axes |
| Vibration (mounting) | compliance to IEC60068-2-6 |
| Safety & EMC | |
| Safety standards |
UL508, UL60950-1, TUV EN60950-1 |
| Withstand voltage |
I/P-O/P 3kVAC, I/P-FG 1.5kVAC, O/P-FG 0.5kVAC |
| Isolation resistance |
I/P-O/P 100MΩ/500VDC, I/P-FG 100MΩ/500VDC, O/P-FG 100MΩ/500VDC |
| EMI conduction & radiation |
EN55011, EN55022 (CISPR22), EN61204-3 Class B |
| Harmonic current |
EN61000-3-2, EN61000-3-3 |
| EMS immunity |
EN61000-4-2/3/4/5/6/8/11, ENV50204, EN55024, EN61000-6-2 (EN50082-2), heavy industry level criteria A |
| Others | |
| MTBF | min. 112900h MIL-HDBK-217F (25°C) |
| Dimension (W x H x D) | 85.5mm x 125.2mm x 128.5mm |
| Weight | 1.6kg |
Page 2 of 2
|
