![]() UBIQUITI Products |
UniFi, NanoStation, PicoStation, PowerStation, NanoBridge, Rocket |
Ubiquity Products are versatile open architecture solutions designed for outdoor use. The products work under the control of an advanced operating system Air OS, which is equipped with both a complex and at the same time intuitive user interface. This can be used as an AP, Bridge, PMP Station or a Mesh networking client. |
Ports | 10/100/1000 Mbps RJ-45 |
---|---|
Chipset |
Atheros MIPS 74Kc, 560 MHz |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
VSWR | 1.8 |
Beam width | 45° |
Dimensions | 179 x 77.5 x 59.1 mm |
Weight | 180 g |
Mounting | Pole-Mount (Kit Included) |
Max. power consumption | 8,5 W |
Power |
24V, 0.5A Gigabit PoE Supply (The product is delivered without a power adapter) |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Ports | 1x 10/100/1000 Mbps RJ-45 |
---|---|
Operating modes |
Access Point, Bridge, Client, WDS |
Processor | MIPS 74Kc |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
Gain | 23 dBi |
Antenna |
detachable, 2x SMA-RP(F) |
Dimensions | 358 x 271.95 x 272.5 mm (14.09 x 10.71 x 10.73") |
Weight |
800 g (1.76 lb), With Mount 980 g (2.16 lb) |
Mounting | Pole-Mounting Kit (Included) |
Max. power consumption | 7 W |
Power |
24V, 0.3A Gigabit PoE Adapter (Included) |
Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Supported Voltage Range | 24V ± 10% |
Wind Loading | 275 N @ 200 km/h (61.8 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
ESD/EMP Protection | ± 24 kV Contact / Air |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
2x External Dual-Band Omni Antennas (3 dBi, 4 dBi) |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
24V Passive PoE (Pairs 4, 5+; 7, 8 Return); 802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), (Supported Voltage Range- 44 to 57VDC) |
Power Supply |
24V, 0.5A Gigabit PoE Adapter |
Maximum Power Consumption | 8,5 W |
Maximum TX Power | 20 dBm |
BSSID | Up to 8 per Radio |
Dimensions | 353 x 46 x 34.4 mm |
Weight | 152 g with Antennas |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -30 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40) |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11b | 1, 2, 5.5, 11 Mbps |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
Power Supply |
24V, 0.5A PoE Adapter (Included) |
Maximum Power Consumption | 6.5 W |
Maximum TX Power |
2.4 GHz - 20 dBm, 5 GHz - 20 dBm |
BSSID | Up to 8 Per Radio |
Dimensions | 160 x 160 x 31.45 mm (6.30 x 6.30 x 1.24") |
Weight | 170 g (185 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 300 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Manufacturer | Ubiquiti |
Standards | IEEE 802.11ac/n |
---|---|
Ports | 2x 10/100/1000 Mbps RJ-45 |
Chipset |
Atheros MIPS 74Kc, 720 MHz |
Operating memory | 128 MB DDR2 |
Flash memory | 8 MB |
Antenna |
build-in, 19 dBi |
VSWR | 1.5 |
Dimensions | 189 x 189 x 125 mm |
Weight | 0.530 kg |
Mounting | mast or wall with the aid of antenna wall support |
Max. power consumption | 8.5 W |
Power | PoE 24V 0.5A Gigabit PoE Adapter (Included) |
Operating temperatures | -40°C ÷ 80°C |
Operating humidity |
5% ÷ 95%, Non-condensing |
Wind Loading | 45.4 N @ 200 km/h (10.2 lbf @ 125 mph) |
Wind Survivability | 200 km/h (125 mph) |
ESD/EMP Protection Air |
± 24 kV, Contact ± 24 kV |
Certifications |
CE, FCC, IC |
RoHS Compliance | Yes |
Salt Fog Test |
IEC 68-2-11 (ASTM B117), Equivalent MIL-STD-810 G Method 509.5 |
Vibration Test | IEC 68-2-6 |
Temperature Shock Test | IEC 68-2-14 |
UV Test |
IEC 68-2-5 at 40° C (104° F), Equivalent ETS 300 019-1-4 |
Wind-Driven Rain Test |
ETS 300 019-1-4, Equivalent MIL-STD-810 G Method 506.5 |
Manufacturer | Ubiquiti |
Ports | 2x 10/100/1000 Mbps RJ-45 |
---|---|
Chipset |
Atheros MIPS 74Kc, 560 MHz |
Operating memory | 64 MB DDR2 |
Frequency range | 5150 MHz ÷ 5875 MHz |
VSWR | 1.6 |
Beam width | 45° |
Dimensions | 257 x 84 x 41 mm |
Weight | 233 g |
Mounting | Pole-Mount (Kit Included) |
Max. power consumption | 8,5 W |
Power |
802.3af Alternative A (Pairs 1, 2+; 3, 6 Return), 24V Passive PoE (Pairs 4, 5+; 7, 8 Return) |
Operating temperatures | -40°C ÷ 70°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Certificates |
CE, FCC, IC |
Manufacturer | Ubiquiti |
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
(1) Dual-Band Antenna, Tri-Polarity, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
Passive Power over Ethernet (24V), 802.3af Supported |
Power Supply |
24V, 0.5A PoE Adapter (Included) |
Maximum Power Consumption | 6.5 W |
Maximum TX Power |
2.4 GHz - 30 dBm, 5 GHz - 22 dBm |
BSSID | Up to Four Per Radio |
Dimensions | 175.7 x 175.7 x 43.2 mm (6.92 x 6.92 x 1.70") |
Weight | 240 g (315 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 200+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Manufacturer | Ubiquiti |
Ports |
2 x 10/100/1000 Ethernet Ports, , 1x USB 2.0 Port |
---|---|
Buttons | Reset |
Antennas |
(3) Dual-Band Antennas, 2.4 GHz- 3 dBi, 5 GHz- 3 dBi |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method |
Passive Power over Ethernet (48V), 802.3af/at Supported |
Power Supply |
48V, 0.5A PoE Adapter (Included) |
Maximum Power Consumption | 9 W |
Maximum TX Power |
2.4 GHz - 22 dBm, 5 GHz - 22 dBm |
BSSID | Up to 8 Per Radio |
Dimensions | 196.7 x 196.7 x 35 mm (7.74 x 7.74 x 1.38") |
Weight | 350 g (450 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2/3, VHT 20/40/80) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Manufacturer | Ubiquiti |
Dual-band, 802.11ac Wave 2 access point that can support over 200 clients with its 2+ Gbps aggregate throughput rate.
The Access Point nanoHD (UAP nanoHD) is a compact, dual-band access point that can reach a 2+ Gbps aggregate throughput rate with its 5 GHz (4x4 MU-MIMO) and 2.4 GHz (2x2 MIMO) bands. The UAP nanoHD can also support over 200 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. With its elegant, nano-sized design, this access point can be staged virtually anywhere indoors where you'd like to enhance your wireless speed and performance. Built for plug-and-play simplicity, the UAP nanoHD can be set up in minutes and fully managed with the UniFi Network web application or mobile app.
Features:
Networking Interface (Mbps) | 1 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas |
2.4 GHz - (2) Single-Port, Single-Polarity Antennas, 2.8 dBi each (Supports 2x2 MIMO), 5 GHz - (2) Single-Port, Dual-Polarity Antennas, 3 dBi each (Supports 4x4 MIMO) |
Wi-Fi Standards | 802.11 a/b/g/n/r/k/v/ac/ac-wave2 |
Power Method |
802.3af PoE, UniFi Switch (PoE) |
Maximum Power Consumption | 10.5W |
Maximum TX Power |
2.4 GHz - 23 dBm, 5 GHz - 26 dBm |
BSSID | 8 per Radio |
Dimensions | 160 x 160 x 32.65 mm |
Weight | 300 g (315 g with Mounting Kits) |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES), 802.11w/PMF |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Noncondensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 200+ |
Supported Data Rates (Mbps) | |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11n |
6.5 Mbps to 450 Mbps (MCS0 - MCS23, HT 20/40) |
802.11ac |
6.5 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2/3/4, VHT 20/40/80), 58 Mbps to 1.7 Gbps (MCS0 ‑ MCS9 NSS1/2, VHT 160) |
802.11b | 1, 2, 5.5, 11 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Networking Interface (Mbps) | 2 x 10/100/1000 Ethernet Ports |
---|---|
Buttons | Reset |
Antennas | 3x Internal Dual-Band Antennas (8 dBi) |
Wi-Fi Standards | 802.11 a/b/g/n/ac |
Power Method | 802.3af PoE (Supported Voltage Range- 44 to 57VDC) |
Power Supply |
48V, 0.5A Gigabit PoE Adapter |
Maximum Power Consumption | 9 W |
Maximum TX Power | 22 dBm |
BSSID | Up to 8 per Radio |
Dimensions | 343.2 x 181.2 x 60.2 mm |
Weight | 633 g |
Power Save | Supported |
Wireless Security |
WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) |
Certifications |
CE, FCC, IC |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -40 ÷ 70° C |
Operating Humidity | 5 ÷ 95% Condensing |
Advanced Traffic Management | |
VLAN | 802.1Q |
Advanced QoS | Per-User Rate Limiting |
Guest traffic isolation | Supported |
WMM |
Voice, Video, Best Effort, and Background |
Concurrent Clients | 250+ |
Supported Data Rates (Mbps) | |
802.11ac |
6.5 Mbps to 1300 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80) |
802.11n |
6.5 Mbps to 400 Mbps (MCS0 - MCS15, HT 20/40) |
802.11a | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11g | 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
802.11b | 1, 2, 5.5, 11 Mbps |
Manufacturer | Ubiquiti |
Page 1 of 2
|