MENU
 ORING NETWORKING Products |
||||
|
Industrial Networking | ||||
|
ORing Industrial Networking Corp was founded in 2008 by a group of engineers that are known as outstanding experts in the field of industrial networking technology for years. ORing is skilled in the field of industrial networking, as well as in technical research, product development and manufacturing. As a developer and supplier of Industrial Networking Device, ORing is mainly focused on the products of Industrial Ethernet Switch, Industrial Serial Device Server and Industrial Wireless products. With the integration of our qualified and reliable industrial Networking Products, the overall communication backbone for business and industry can be easily established with security and reliability. ORing provides total solutions for IP base industrial-grade networking devices such as PAN, LAN, WAN, Metro, wired/wireless, mobile connection. With the extraordinary Open-RingT technologies, ORings products can be used as an integrator of all sorts of industrial networking products in the market. Applications
Catalogue
News - ORing`s Cyber-Hardened Ethernet Switches Secure IEC 62443-4-2 Certification - New Industrial SPE Switch (Single Pair Ethernet) - Experience the Perfect Blend of Affordability and Performance with ORing |
- Communication for industry
-
#06523
Industrial Gigabit High Power Injector, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing INJ-101GT++-60W)
The INJ-101GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 1-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-101GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. The INJ-101GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3af/at PoE standards, and provide the DIP switch configurator for High power PoE management.Physical Ports 10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 1 10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 1 Operating Voltage Input Voltage 50 ~ 57 VDC / 4-pin terminal block Power Consumption 1 Watts (Not include PD's device) PoE Power Budget 60 Watts max LED Indicators Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning NormallyPoE Indicators 1 x LED,
Blue On - PoE Device Link,
Blue Off - None PoE Device Detected,
Blink (Blue) - Overload presentProtection Short Circuit Protection present Over Load Protection present Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 26.1(W)x70(D)x95(H)mm (1.03 x 2.76 x 3.74 inch) Weight 188g Environmental Storage Temperature -40÷85°C(-40÷185°F) Operating Temperature -40÷75°C (-40÷165°F) Operating Humidity 5%÷95% Non-condensing Regulatory approvals EMC EN55032,
EN55024(CE EMC),
FCC Part 15B,
EN61000-3-2,
EN61000-3-3EMI CISPR 32,
EN55032,
FCC Part 15B class AEMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty Warranty period 5 years
#07995Industrial Gigabit High Power Injector, 2x10/1000 RJ-45 PoE + 2x10/1000 RJ-45 (ORing INJ-102GT++)
The INJ-102GT++ PoE Injector series is not only an IEEE802.3at compliant device but also an advanced high power PoE injector. It is intelligent detection that provided 2-ports 10/100/1000Base-T (X) PoE outputs. The device does not turn on power until it detects a valid PoE signature from the PoE devices attached downstream on the Ethernet cable. This protection against damage to non-PoE compliant equipment which may be connected to the Ethernet cable. Therefore, only an IEEE 802.3at/802.3af compliant device can be powered with the INJ-102GT++ PoE Injector. Typically in Gigabit networks the maximum allowable CAT5 cable length is about 100 meters, due to the limitation of the Ethernet standards. Because of its 24~57VDC power input with boosting circuit, the total output power can be up to 180Watts[Note2] for all ports usage. The installer doesn’t need to worry about voltage drops caused by cable length. The INJ-102GT++ PoE Injector can function with any PoE P.D. equipment which is fully compliant with the IEEE 802.3at/802.3af PoE standards.
Note1: The equipment being powered must be fully IEEE 802.3at/802.3af compliant in order for the power supply to be able to sense the PoE devices signature and apply power. Power is supplied on Ethernet pins 1/2 (V+) and 3/6 (V-).
Note 2: LTPoE++TM PSE technology is applied on this product. Only when an LTPoE++ TM Powered Device (PD) is attached can the PSE port deliver up to 180W of output power.Physical Ports 10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 2 10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 2 Operating Voltage Input Voltage 50 ~ 57 VDC / 4-pin terminal block Output Power 57V / 3157mA,
180 Watts max. Per portLED Indicators Power indicator PWR / Ready 1 x LED,
Green On - Power is on and functioning NormallyPoE Indicators 2 x LED,
Blue On - PoE Device Link,
Blue Off - None PoE Device DetectedProtection Short Circuit Protection present Over Load Protection present Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 26.1mm x 70mm x 95mm Weight 300g Environmental Storage Temperature -40÷80°C(-40÷176°F) Operating Temperature -20÷70°C (-4÷158°F) Operating Humidity 5%÷90% Non-condensing Regulatory approvals EMI FCC Part 15,
CISPR (EN55022) class AEMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty Warranty period 5 years
#07970Industrial Gigabit PoE Splitter, 1x10/1000 RJ-45 PoE + 1x10/1000 RJ-45 (ORing SPL-101GT)
SPL-101GT is a high power PoE Splitter for use in Power over Ethernet systems. With Ethernet Input (data + power) port and Output (data only) port, SPL-101GT may split power from existing LAN cable and convert up to 24VDC/1.25A for power hungry applications such as Wireless APs, Security cameras and IP Phones. The internal current limit, short-circuit and overload protection are implemented for use as a DC power supply.Physical Ports 10/100/1000Base-T(X) in RJ-45 Ethernet Port Input 1 10/100/1000Base-T(X) in RJ-45 Ethernet Port with P.S.E. Output 1 Operating Voltage Input Voltage 36 ~ 57 VDC / 4-pin terminal block Output Power 24V / 1.25mA,
30 Watts max. Per portLED Indicators Power indicator PWR / Ready 1 x LED,
Blue On - Power is on and is functioning NormallyProtection Short Circuit Protection present Over Load Protection present Isolation Protection 1500V Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 26.1mm x 70mm x 95mm Weight 250g Environmental Storage Temperature -40÷80°C(-40÷176°F) Operating Temperature -20÷70°C (-4÷158°F) Operating Humidity 5%÷90% Non-condensing Regulatory approvals EMI FCC Part 15,
CISPR (EN55022) class AEMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11Safety EN60950-1 Warranty Warranty period 2 years
#04536Network Management Utility (Oring Open Vision v3.6 M50)
A powerful management utility is important for administrators to monitor and manage all devices in a local network.
-
