VUTLAN Products |
Server Rooms Monitoring Systems |
VUTLAN provides IP monitoring and power management solutions for enterprises and small businesses. Monitoring Systems and IP Power Distribution ranges are designed for large data centres, server rooms, web hosting facilities, 19 inch telecommunication racks etc. Environmental monitoring in the server rooms, on the telecommunication nodes, in data centers et cetera is of great importance to many if not to all companies. What are the indoor temperature and humidity, what happens to the air conditioning or fans, whether the line voltage has a huge impact on the reliability of the equipment and the service life of servers, switches, and routers. If you have the only rack with a couple of ups and two three servers, you need to install a small monitoring unit with 5-6 sensors, enter your notifications and logic and may be to connect an inexpensive USB cam. Built-in web server and video server allows you to view logs and events at your facility, the logic when properly installed will allow the monitoring system to accept most decisions, for example, to shut down servers at high temperature or at failure of air conditioning or fans, or in case of fire, etc. and to warn user with any notification or SMS (if GSM modem is installed). If you have a set of facilities and requires a scalable, easy-to-install solution for monitoring a distributed network, then you must either apply extension units and sensors that allow to gather information from wide area, or when there are absolutely great distances between nodes and objects, it is possible to use SNMP applications that allow to collect information from multiple remote sites and can be stored in any database, if necessary, to use this information by appropriate authorities. It is also important to use monitoring systems with easy scalability and a wide range of sensors,with longlife-warranty period at a reasonable prices. All this ensures the equipment from VUTLAN, the most modern manufacturer of IP monitoring systems! Manufacturer's website: http://www.vutlan.com
|
Connection |
Can be connected via RJ-11 cable to each control unit. Determination of the sensor type and connection takes place automatically. At the end of the sensor, connect the 2-wire VT-WLC detection cable. |
---|---|
Maximum distance from the controller | 100m |
The maximum length of the detection cable track | 225m |
Set includes |
sensor, cable, terminal strip type TBW-5-2p, screw 4.8×16mm, double sided sticker, VT-WLC adapter |
Net weight | 60g |
Dimensions (LHW) | 60×18×18mm |
Connection | The sensor is connected to the controller by the RJ-11 network cable. Determination of the sensor type and connection takes place automatically. Sensor response time 0.1s |
---|---|
Max. distance | 50m |
Net weight | 106g |
Dimensions | 60×18×18mm |
Power Consumption | 60mW |
Supply includes |
Sensor converter, airflow sensor, mounting bracket, 2m RJ11/RJ12 cable, screws, nuts, bolts and a sticker. |
Technical specifications | |
---|---|
Measured temperature range | -40 ÷ 100°C |
Accuracy | ±0.4°C in –10 to 85 °C range |
Measured humidity range | 0 - 95%RH |
Accuracy %RH | ± 3% RH in 0 to 80% range |
Maximum distance from the appliance | 225m |
Features | |
Connection |
Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-12 patch cable. Determination of sensor's type and connection occur automatically. The system enables connecting multiple sensors to a linear layout. For this purpose, each sensor is equipped with two RJ-12 input and output sockets. |
Net weight | 160g |
Dimensions | 68 × 47 x 26 mm |
Communications | |
---|---|
Sesnor type | CAN digital sensor |
Inputs/Outputs | 2x RJ11 6p4c |
Daisy chain |
Yes, a daisy chain is possible for all CAN sensors. |
Max. distance from the monitoring unit | 225m |
LED indicators | Red / Green (RUN/ERROR) |
Accuracy | |
Pressure RMS noise | 0.2Pa (equivalent to 1.7cm) |
Pressure error | ±0.25% (equivalent to 1m at 400m height change) |
Pressure from °C | ±1.5Pa/K (equivalent to ±12.6cm at 1 °C temperature change) |
RH accuracy | ± 3% RH (max) |
Hysteresis | ≤2% RH |
Response time | 1s |
Temperature | 1.5°C |
Environmental | |
Pressure range | 300 to 1100 hPa |
Working temperature range | −40 to +85 °С |
Humidity operating range | 0 to 95% RH |
Power Requirement | |
Power input |
12V DC, 1A (power supplied on a CAN bus chain) |
Current consumption | 1 Watt |
Mechanics | |
Dimensions | 68x47x26 mm |
Packaging weight | 160 g |
Technical specifications | |
---|---|
Smoke sensitivity | 0,05 - 0,2 db/m |
Response time | 10 sec |
Measured temperature range | -10 to +75 °C |
Accuracy | ±0.4°C in –10 to 85 °C range. |
Measured humidity range | 0 - 95%. |
Accuracy %RH | ± 3% RH in range of 0 - 80% |
Maximum distance from the appliance | 225m |
Features | |
Installation | On the bottom there are mounting holes for fastening the smoke sensor to the surface using screws 4.8×20mm or/and bracket and M4 screws. |
Connection | Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-11 patch cable. Determination of sensor's type and connection occur automatically. Monitoring system allows connection of up to 40 smoke sensors into a linear circuit. |
Set includes |
Sensor, 3-wired shielded patch cable RJ12 (2m), bracket, 2 screws and 2 nuts M4, 2 screws 4.8×20mm, double sided sticker. |
Net weight | 310g |
Dimensions (LHW) | Ø100×45mm |
Connection: | |
---|---|
Power input | -12V / +12V |
Outputs | 4 pin terminal |
Power Consumption | 1 Watt |
Operating temperature | -10°C ÷ 80°C |
Operating humidity |
5% ÷ 95%, non-condensing |
Net weight | 150g |
Dimensions (LHW) | 68 × 47 x 26 mm / 60 × 61 × 16 mm |
Technical specifications | |
---|---|
Rated voltage | 12V |
Sound pressure | 108 dB |
Tone frequency | 3.8 kHz |
Flash frequency | 150 / min |
Net weight | 140g |
Dimensions (LHW) | 70 x 36 x 56 mm |
Technical specifications | |
---|---|
Rated voltage | 12V |
Flash frequency | 90 / min |
Net weight | 110g |
Dimensions (LHW) |
73 x 45mm, cable 3m |
Technical specifications | |
---|---|
Type | Power supply for CAN bus chain |
Input | RJ11 6P4C CAN port ⌀3.4/1,35 mm 12V |
Otuput | RJ11 6P4C CAN port |
Daisy chain | Allows daisy chain |
Max. q-ty of CAN sensors powered | 15 |
LED indicators | Green (Status On/Off) |
Environmental | |
Working temperature range | −40 °C to +100 °C |
Humidity operating range | 0-95% RH |
Mechanics | |
Dimensions | 68 x 67 x 26,2 mm (LxWxH) |
Packaging weight | 190g |
Mounting options |
Desktop, Wall mount, Indoor |
Page 3 of 7
|