MENU
 VUTLAN Products |
|
Server Rooms Monitoring Systems |
VUTLAN
VUTLAN provides IP monitoring and power management solutions for enterprises and small businesses. Monitoring Systems and IP Power Distribution ranges are designed for large data centres, server rooms, web hosting facilities, 19 inch telecommunication racks etc. Environmental monitoring in the server rooms, on the telecommunication nodes, in data centers et cetera is of great importance to many if not to all companies. What are the indoor temperature and humidity, what happens to the air conditioning or fans, whether the line voltage has a huge impact on the reliability of the equipment and the service life of servers, switches, and routers. If you have the only rack with a couple of ups and two three servers, you need to install a small monitoring unit with 5-6 sensors, enter your notifications and logic and may be to connect an inexpensive USB cam. Built-in web server and video server allows you to view logs and events at your facility, the logic when properly installed will allow the monitoring system to accept most decisions, for example, to shut down servers at high temperature or at failure of air conditioning or fans, or in case of fire, etc. and to warn user with any notification or SMS (if GSM modem is installed). If you have a set of facilities and requires a scalable, easy-to-install solution for monitoring a distributed network, then you must either apply extension units and sensors that allow to gather information from wide area, or when there are absolutely great distances between nodes and objects, it is possible to use SNMP applications that allow to collect information from multiple remote sites and can be stored in any database, if necessary, to use this information by appropriate authorities. It is also important to use monitoring systems with easy scalability and a wide range of sensors,with longlife-warranty period at a reasonable prices. All this ensures the equipment from VUTLAN, the most modern manufacturer of IP monitoring systems!  Manufacturer's website: http://www.vutlan.com |
.jpg)
- Computer Network Accessories
-
- » ADDITIONAL ACCESORIES#08390
Converter 4-20mA (Vutlan VT420)
Converter of current loop 4-20mA is used for measurement of constant current on 4-20mA outputs of sensors and converting data into a IP monitoring system format. The system interface allows you to assign the sensor and to introduce the function data conversion.
Galvanic isolation of 3 kV between I/O is used in a receiver.
#08186Dry contacts board IN/OUT (Vutlan VTX40)
A complementary module for VT900 and VT960 DC master units.Technical specifications Dry contacts x32 dry contact inputs,
x8 isolated dry contact outputsConnection BH-10 Supply includes BH-10 bus cable,
x8 terminals (6P 3.5mm),
x2 terminals (8P 3.5mm),
x5 screwsDimensions (LHW) 241 x 35 x 11 mm
#08235Dry contacts module (Vutlan VT16)
Complementary module for moin units, can be connected to 16 dry contacts.
Dedicated for SC8100, VT8101, VT8110, VT800.Technical specifications Dry contacts 16 Contact outputs 3.5 mm Features Installation On the PCB there are 3 mounting holes for fastening to the surface using screws 3 mm inside of any master unit. Connection Jack IDC2-10 is connected to IDC2-10 input of master unit. Determination of PCB's type and connection occur automatically. Monitoring system allows connection of up to 16 dry contacts. Supply includes PCB,
10-wired IDC2 cable (10cm),
3 screws M3.Net weight 80g Dimensions (LHW) 70x10×25mm
#08916Dry contacts unit (Vutlan VT440)
Allows to increase the number of dry contacts connected to any Vutlan monitoring unit. Adds 32 dry contacts (or 64 with VT32 module). Can be connected to any CAN port.Number of dry contacts 32 - 64 Contact outputs 3.5mm Max contact distance 500m Number of CAN ports 2 (1 input,
1 output)Mounting The unit includes two 19" mounting angles for mounting inside the rack. Alternatively,
there are 2 mounting holes on the bottom of the case for fastening on the wall. Fasten the unit,
connect CAN inputs to the input of the previous CAN unit or of the monitoring unit. The red LED lights up. Match the bus terminators of the CAN units. Switch terminator TR in ON position on the monitoring unit and on the last CAN unit,
TR on intermediate CAN units are in Off (1,2) position. Maximum 8 CAN units,
sensors and/or devices can be on one CAN bus.Inventory Unit,
3-pair shielded patch cable RJ-12 2 m length,
screw 3.5 x 16 mm,
fastener 2-sided,
rubber feet,
19" mounting angles.Net weight 0.5 kg Dimensions (LHW) 215×40×40mm
#08116HAT sensor transducer 0-5V DC (Vutlan VT407)
The transducer is used together with HAT-100Q1 current transducer.Power input 12V DC,
1AInput RJ-12 / RJ-11 Power Consumption 100mW Operating temperature -10°C ÷ 80°C Operating humidity 5% ÷ 95%,
non-condensingNet weight 150g Dimensions (LHW) 68 × 47 x 26 mm Max distance 50m #08117 AC current transducer Vutlan HAT-100Q1
#08197Internal LTE, GPS modem (Vutlan VT710)
A modem for Vutlan monitoring units (VT900, VT900 DC, VT960, VT960 DC). The module enables sending SMS about the system status / alarms and access to the Internet via LTE network. Antennas are not included with the module, must be purchased separately. The GPS function is used to synchronize the time according to geographic location.Antennas:
#08354 GPS Antenna 3 dBi 3m(Vutlan VT6691)
#03105Internal LTE, GPS modem (Vutlan VT740)
4G LTE slot modem for Vutlan monitoring units. Allows to receive and send SMS messages. Provides Ethernet over 4G LTE. Power-cycling is an embedded function.
Can be used together with VT335t, VT825t/VT825tt, VT855t/VT855tt & VT604/VT608.
Antennas included.
#08318Internal LTE, GPS modem (Vutlan VT760)
A modem for Vutlan monitoring units VT335S, VT335S DC, VT805, VT825, VT604. The module enables sending SMS about the system status / alarms and access to the Internet via LTE network. The GPS function is used to synchronize the time according to geographic location. Antenas inculded.INTERFACE Network interface WCDMA/HSDPA/HSPA+ B1/B5/B8 LEDs Red / Green Led Chip SimCom Extension protocols FDD-LTE B1/B3/B5/B7/B8/B20 Uplink up to 5Mbps Downlink up to 10Mbps Dimensions (LxHxW) 60 x 50 x 15 mm Net weight 60 g Installation There are 3 mounting M3 holes on a board.
#03099Internal LTE, GPS modem (Vutlan VT790)
4G LTE slot modem for Vutlan monitoring units. Allows to receive and send SMS messages. Provides Ethernet over 4G LTE. Power-cycling is an embedded function.
Can be used together with VT960i & VT960ii.
Antennas included.
#08370Magnet access sensor (Vutlan KMS-30)
The sensor made for checking whether the doors or windows have been opened/closed.Installation Insert the terminal into "Dry contact Input" of Vutlan monitoring system. Supply includes magnet sensor,
4x screws M3 12.5mm,
2x stickers.Max. distance 500m Power consumption 6W Dimensions (WHL) Two 60x18x18mm compact devices
-
Page 4 of 7
|
