MENU
 VUTLAN Products |
|
Server Rooms Monitoring Systems |
VUTLAN
VUTLAN provides IP monitoring and power management solutions for enterprises and small businesses. Monitoring Systems and IP Power Distribution ranges are designed for large data centres, server rooms, web hosting facilities, 19 inch telecommunication racks etc. Environmental monitoring in the server rooms, on the telecommunication nodes, in data centers et cetera is of great importance to many if not to all companies. What are the indoor temperature and humidity, what happens to the air conditioning or fans, whether the line voltage has a huge impact on the reliability of the equipment and the service life of servers, switches, and routers. If you have the only rack with a couple of ups and two three servers, you need to install a small monitoring unit with 5-6 sensors, enter your notifications and logic and may be to connect an inexpensive USB cam. Built-in web server and video server allows you to view logs and events at your facility, the logic when properly installed will allow the monitoring system to accept most decisions, for example, to shut down servers at high temperature or at failure of air conditioning or fans, or in case of fire, etc. and to warn user with any notification or SMS (if GSM modem is installed). If you have a set of facilities and requires a scalable, easy-to-install solution for monitoring a distributed network, then you must either apply extension units and sensors that allow to gather information from wide area, or when there are absolutely great distances between nodes and objects, it is possible to use SNMP applications that allow to collect information from multiple remote sites and can be stored in any database, if necessary, to use this information by appropriate authorities. It is also important to use monitoring systems with easy scalability and a wide range of sensors,with longlife-warranty period at a reasonable prices. All this ensures the equipment from VUTLAN, the most modern manufacturer of IP monitoring systems!  Manufacturer's website: http://www.vutlan.com |
.jpg)
- Computer Network Accessories
-
- » ADDITIONAL ACCESORIES#03120
Modbus RTU Slot Extension (Vutlan VT485m)
Allows to monitor up to 32 Modbus RTU devices/meters/sensors. The maximum distance of a daisy chain is up to 1000 meters. Each metered value of a Modbus device is addressed individually using input registers and is shown by the system as virtual sensors. You can configure thresholds and icon representations for these elements.
It can be used with VT335t, VT336t, VT825t, and VT855t monitoring systems. A slot PCB board can be inserted inside the monitoring unit while the unit is in operation. Has an internal termination and by default, it is switched ON (if required can be turned off).
#08368Omni-directional GSM antenna 7 dBi (Vutlan VT6604)
Omnidirectional gain 7 dBi Frequency range 890-960 / 1710-1890 / 1920-2170 MHz Impedance 50 Ω Connector SMA(M) Cable RG174 Mounting Possibilities Has A Magnet At The Bottom Cable lenght 3m Temprature Min. -10° C - Max.80° C Size ∅50 x 520 mm Manufacturer Vutlan
#08917Rack control unit (Vutlan VT430)
The module has a PIR sensor for rack door control, 2 dry contacts and a humidity sensor. Connected to a CAN port, it allows further CAN chain connection.
Sensors and contacts appears in the system automatically.
Max. distance from the monitoring unit is 300 meters.Technical specifications Measured humidity range 10-95% RH Accuracy 5% RH PIR sensor disrance 30mm Number of dry contacts 2 Number of CAN ports 2 Maximum distance from the appliance 300m Features Installation There are 4 mounting holes on the bottom of the case for fastening. Fasten the unit,
connect CAN inputs to the input of the previous CAN unit or of the monitoring unit.Connection Sensor's jack RJ-12 is connected to CAN input of any system unit or to a CAN output of another sensor using RJ-12 patch cable. Determination of sensor's type and connection occur automatically. Supply includes Unit,
shielded patch cable RJ-12, 2 screws and 2 nuts M6,
sticker,
dry contacts connector..Net weight 0.2 kg Dimensions (LHW) 89×27×36mm
#03130
Rechargeable backup battery (Vutlan VT-ACCU) + 2x 3.7V battery
Rechargeable backup battery is an extension module that can be purchased separately. It is used for VT604t, VT825t, and VT855t. While in operation, the batteries are charged. If the power input drops. The unit will detect a voltage drop and work from VT-ACCU rechargeable batteries until the batteries are discharged.
2pcs LI-ION 3.7V 740mAh batteries included.
#03107Relay contact 5A (Vutlan VT11)
Relay switchable contact. Can be used together with equipment, for example for switching ON/OFF air conditioners. Can control power for magnetic locks, bolt locks, solenoid electromagnets, siren, light source, heater and etc.
Can be connected to any monitoring system or device with 12V outputs.Technical specifications Max. switching voltage 250VAC / 30VDC Max switching current 5A Max. switching power 1250VA / 150W Min. contact load No gold plated,
5VDC 10mAFeatures Max distance 200m Power Consumption 12mW Net weight 60g Dimensions (LHW) 60×18×18mm Operating temperature Min. -50° C - Max.+105° C Package includes x2 wire cable (1 meter),
screw M5 L15mm,
x1 3.81mm 2P terminal,
x1 5.0 2P terminal,
sticker
#08297RFID Card (Vutlan VT108)
Unique proximity cards for VT107 card readers.Technical specifications Rated voltage 12V Memory 64bit Frequency 125 kHz Standard EM4100 Net weight 7g Dimensions (LHW) 86 x 59 x 1 mm Accessories:
#08269 RFID Card reader (Vutlan VT107)
#08269RFID Card reader (Vutlan VT107)
Proximity card reader for contactless reading data from RFID cards (Unique standard). Dedicated for VT855i/VT855ii & VT960i/VT960ii.Technical specifications Rated voltage 12V Current 30 - 55 mA Frequency 125 kHz Range response 15 cm Net weight 100g Dimensions (LHW) 82 x 82 x 22 mm #08297 RFID Card (Vutlan VT108)
#03126SE Mini Reader
Versatile miniature reader for proximity identifiers. Highly secure, open technology OSDPv2 reader. Resistant against moisture, dust, and vandal-proof. Easy to configure. Works with Mifare Plus cards in SL3 security mode.
#08288Sensor unit (Vutlan VT408)
Module allows to increase the number of sensors connected to the Vutlan master module. The expansion unit is connected to the CAN connector of the controller.Number of analog ports 8 Number of CAN ports 2 Maximum bus length 300 meters Maximum analog sensor cable length 50-150 meters,
depending on the sensor typeInstallation In the lower part of the casing there are Ø 5 mm holes for mounting the module, at a distance of 50 mm and 89 mm from the center. The cable is connected to the connector on the side wall. Connection Can be connected via RJ-12 cable to the CAN input of the control unit or another CAN sensor. The module is automatically detected on the first connection. Set includes module,
CAN cable RJ-12 (2m),
3.5x16mm screwsNet weight 0.6 kg Dimensions (LHW) 110×68×40 mm
#08204USB100 / USB dome camera
USB UVC/MJPEG digital camera with high resolution and with IR Leds for direct connection to the VUTLAN system controller.
It allows to view the monitored room on an ongoing basis as well as send a video sequence to an email address in response to a defined event.
In addition, the camera connected to the VUTLAN controller is visible in the network at a dedicated URL, allowing to capture the video stream just like from an IP camera (MJPEG stream).HARDWARE FEATURES: Interface USB format(Complies with USB 2.0 CAMERA: Image Sensor 1/4" Color CMOS H62 Resolution 1.0 Megapixel (640 x 480) Minimum Illumination 0.01 Lux @ F1.2 VIDEO/IMAGE: Video Compression MJPEG Frame Rate & Resolutions Max. 20 fps at 640x480 (VGA),
Max. 20 fps at 320x240 (QVGA)Video Streaming Controllable Frame Rate OTHERS: Cable lenght 2,6m Operating Temperature 0°C∼ 40°C (Humidity 0% RH∼ 80% RH) Weight 550g
-
.jpg?1659448011)
Page 5 of 7
|
