This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
Communication for Industry
Thursday, 21 November
Search for product:
#06535
Wireless DevicesORING NETWORKING#06535

Wireless router 4G LTE, 2x 10/100 RJ-45 (LAN) + 1x 802.11b/g/n (WLAN) + 1x RS-232/422/485 (ORing IMG-4312-4G)

IMG-4312-4G is an innovative 1 port RS-232/422/485 and 4G LTE cellular Gateway with 2 port 10/100Base-T(X) port. IMG-4312-4G also provide IEEE802.11 b/g/n wifi interface which have 150Mbps link speed. It could be configured to connect to the internet by dialing up 2G/3.5G/LTE cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-4312-4G can also transfer data into 5 host PCs simultaneously for backup purposes. In addition, IMG-4312+-4G also provides P.D. feature on ETH1 port which is fully compliant with IEEE802.3af PoE P.D. specification Therefore, IMG-4312-4G is one of the best solutions for applications of wireless and serial communication.
Physical Ports
10/100 Base-T(X) Ports RJ-45 Auto MDI/MDIX 2
SIM Card Slot 1 (Only Mini SIM without adapter)
WLAN interface
Antenna Connector 1 x RP-SMA Female
Modulation IEEE802.11b CCK,
DQPSK,
DBPSK
Modulation IEEE802.11g/n OFDM with BPSK,
QPSK,
16QAM,
64QAM
Frequency Band 2.412~2.472 Ghz
Transmission Rate IEEE802.11b 1/2/5.5/11 Mbps,
IEEE802.11g 6/9/12/18/24/36/48/54 Mbps,
IEEE802.11n UP to 150 Mbps
Transmit Power 802.11b 19dBm ± 1.5dBm@11Mbps,
802.11g 17dBm ± 1.5dBm@54Mbps,
802.11gn HT20 16.5dBm ± 1.5dBm @MCS7,
802.11n HT40 14.5dBm ± 1.5dBm @MCS7
Receiver Sensitivity 802.11b -90dBm ± 2dBm@1Mbps,
802.11g -72dBm ± 2dBm@54Mbps,
802.11n HT20 -68dBm ± 2dBm@MCS7
Encryption Security WEP (64-bit ,128-bit key),
WPA/WPA2 PSK - TKIP and AES encryption (802.11i),
802.1X/RADIUS Authentication supported
Cellular Interface
Antenna Connector 2 x RP-SMA Female
Cellular Standard GSM/GPRS/EGPRS/EDGE/WCDMA/HSDPA/HSUPA/LTE
Band Option Europe(EU grade) LTE - 2100(B1)/1800(B3)/2600(B7)/900(B8)/800(B20) MHz,
UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ - 800/850/900/1900/2100 MHz,
GSM/GPRS/EDGE - 850/900/1800/1900 MHz
Serial Ports
Connector DB9 x1
Operation Mode RS-232,
RS-422,
RS-485 4/2-wire,
can be configured by DS-Tool
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 7, 8
Parity odd,
even,
none,
mark,
space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485 (4-wire) Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire) Data+, Data-, GND
Flow Control XON/XOFF,
RTS/CTS,
DTR/DSR
Network Protocol ICMP,
IP,
TCP,
UDP,
DHCP,
BOOTP,
DNS,
SNMP V1/V2c,
HTTPS
LED Indicators
Power Indicator 3 x LEDs,
Green On - Power is on
10/100TX RJ45 port indicator 2 x LEDs,
Green for port Link/Act at 100Mbps.
Serial TX / RX LEDs Red - Serial port is receiving data,
Green - Serial port is transmitting data
WIFI LEDs 1 x LED,
Green for WiFi Link/ Act
WAN LED 1 x LED,
Green for Cellular modem Link/ Act
Power
Redundant Input Power Dual DC inputs. 12~48 VDC on 6-pin terminal block
Power consumption (typical) 3W
Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 45(W)x80.6(D)x95(H) mm
Weight 368g
Environmental
Storage Temperature -40÷85°C (-40÷185°F)
Operating Temperature -10÷60°C (14÷130°F)
Operating Humidity 5%÷95% Non-condensing
Regulatory approvals
EMI FCC Part 15,
CISPR (EN55022) class A
EMS EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),EN61000-4-8,
EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty
Warranty period 5 years

« previous product  |  next product »     » show on list«» Wireless Devices «
* For special orders only
Net Price: 614.00 USD  Unit: pcs
Minimal order quantity: 1 x pcs
Quantity in the smallest collective package: 1 x pcs
x pcs
[+]add item to comparison | show comparison [0]



All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
You can download this software from following website: Adobe Reader

Though we pay utmost attention, we cannot guarantee, that published materials are free of errors and diversities.
These lapses cannot be a basis for any legal claims.
All images placed on Atel Electronic's web sites may slightly vary from real look of current selling products.
If you have any doubts regarding information on this website please contact us (phone +48-77-4556076, e-mail cust@atel.com.pl).