This website uses cookies to operate basic website functions, personalise content, analyse traffic and for ad measurement purposes.
Our partners will collect data and use cookies for ad personalisation and measurement.
By continuing we assume your permission to deploy cookies, as detailed in our privacy policy. OK, Close

 
 
High-Technologies Supplier
Sunday, 22 December
[Log In]

Industrial IoT - IIoT Gateway
 
Oring Networking » Industrial IoT » IIoT Gateway

IMG-4312


Overview

IIOT Gateway - IMG-4312-MN

IMG-4312 LPWAN series is an innovative 1 port RS-232/422/485 and LTE LPWAN IoT Gateway with 2 port 10/100Base-T(X) port.  IMG-4312 also provide IEEE802.11 b/g/n wifi interface which have 150Mbps link speed. It could be configured to connect to the internet by dialing up LTE Cat-M1/CAT-NB1 cellular modem to fulfill demands of various applications rapidly a. In addition, IMG-4312 can also transfer data into 5 host PCs simultaneously for backup purposes. In addition, IMG-4312+ also provides P.D. feature on ETH1 port which is fully compliant with IEEE802.3af PoE P.D. specification Therefore, IMG-4312 is one of the best solutions for applications of wireless and serial communication.


Features

  • Provide 2 x 10 / 100/1000 Base –T(X) port and SIM card slot
  • LTE Cat-M1/Cat-NB1 modem dial up included
  • Support Open VPN, PPTP VPN
  • High Speed Air Connectivity: WLAN interface support up to 300 Mbps link speed
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2 / WPA2-PSK (TKIP, AES) / 802.1x Authentication supported
  • Versatile modes & event alarm by e-mail.
  • Event warning by Syslog, Email, SNMP Trap, Relay output
  • Redundant multiple host devices:
    • 5 host devices: TCP Server, TCP Client mode; 4 IP ranges: UDP
  • Modbus Protocol conversion between Modbus TCP and Modbus RTU
  • Support MQTT
  • Dual Power inputs 12~48VDC
  • Rugged IP-30 casing design

Specification


ORing M2M Gateway Model IMG-4312+-MN
Physical Ports

10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX

 2
PoE P.D Port  P.O.E.Present at ETH1 Power Device (IEEE 802.3af):
IEEE 802.3af compliant input interface
Over load & short circuit protection
Isolation Voltage: 1000 VDC min.
Isolation Resistance : 108 ohms min
SIM card slot 1
Cellular Interface
Antenna Connector 1 x SMA Female
Cellular Standard LTE Cat-M1/Cat-NB1
Download/Upload Rate LTE Cat-M1:300 / 375 Kbps
LTE Cat-NB1: 32 / 70 Kbps
Band options LTE Cat-M1/Cat-NB1 :
LTE FDD:
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28 LTE Cat-M1 :
LTE TDD :B39
Wifi Interface
Antenna Connector 1 x RP-SMA Female
Modulation IEEE802.11b: CCK/DQPSK/DBPSK
IEEE802.11g: OFDM
IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band America / FCC:
2.412~2.462 GHz (11 channels )
Europe CE / ETSI:
2.412~2.472 GHz ( 13 channels )
Transmission Rate 802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 150 Mbps
Transmit Power 802.11b: 19dBm ±1.5dBm
802.11g: 17dBm ±1.5dBm
802.11n(2.4G@20MHz): 16dBm ±1.5dBm
802.11n(2.4G@40MHz): 14dBm ±1.5dBm
Receiver Sensitivity 802.11b: -90dBm ±2dBm@1Mbps
802.11g: -72dBm ±2dBm@54Mbps
802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm
Encryption Security WEP: (64-bit ,128-bit key supported)
WPA/WPA2 :802.11i(WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Serial Ports
Connector DB9 x 1
Operation Mode RS-232/422/485
Serial Baud Rate 110 bps to 115.2 Kbps
Data Bits 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR
Network Protocol
Protocol ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, DDNS, PPPoE
LED indicators
Power indicator 3 x LEDs, PWR 1(2)(PoE) / Ready:
Green On: Power is on
10/100TX RJ45 port indicator 2 x LEDs, Green for port Link/Act at 100Mbps.
Serial TX / RX LEDs: Red: Serial port is receiving data
Green: Serial port is transmitting data
WIFI LED 1 x LED, Green: WIFI Link /ACT  
WAN LED 1 x LED, Green On : Power is on and functioning Normal
Power
Input Power Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) 3.5 Watts
Overload current protection Present
Reverse polarity protection Present on terminal block
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 45(W)x80.6(D)x95(H) mm
Weight (g) 372 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -10 to 60°C (14 to 140°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-31
Vibration IEC60068-2-6
Safety EN60950-1
Warranty 3 years

Datasheet





IMG-6322GT


Overview

IIOT Gateway - IMG-6322GT-MN

IMG-6322GT LPWAN series is an innovative 1 port RS-422/485, 1 port RS-232/422/485 and IEEE802.11 a/b/g/n VPN gateway with 2 ports 10/100/1000Base-T(X) ports.  It could be configured to connect to the internet by dialing up LTE Cat-M1/Cat-NB1 modem to fulfill demands of various applications rapidly and construct the WLAN environment. IMG-6322GT is also able to act as Modbus Gateway to convert in between different Modbus protocol such as Modbus TCP and Modbus RTU via wired or wireless interface.  In TCP Server mode, IMG-6322GT can also transfer SSL encryption data into 5 host PCs simultaneously for backup purposes.  Therefore, IMG-6322GT is one of the best solutions for applications of wireless and serial communication.


Features

  • Provide 2x10/100Base-T(x) port and single SIM card slot
  • LTE CAT-M1/CAT-NB1 model included
  • High Speed Air Connectivity: WLAN interface support 802.11 b/g/n up to 150Mbps link speed
  • Support Open VPN, PPTP VPN
  • Support DHCP forwarding through PPTP function
  • Versatile modes & event alarm by e-mail.
  • Event warning by Syslog, Email, SNMP Trap
  • Support MQTT
  • Redundant multiple host devices:
    5 host devices:Virtual COM, TCP Server, TCP Client mode,
    UDP mode(4 IP Ranges)
  • 12~48VDC power input on terminal block
  • 1KV isolation for PoE P.D. (IMG-4312+-MN)
  • Rigid IP-30 housing design
  • Din-Rail and panel mounting enabled.
  • Support OpenWRT SDK for project

Specification


ORing M2M Gateway Model IMG-6322GT-M1 IMG-6322GT-MN
Physical Ports

10/100/1000 Base-T(X) Ports in RJ45 Auto MDI/MDIX

 2
SIM card slot 1
Cellular Interface
Cellular Standard LTE Cat-M1 LTE Cat-M1/Cat-NB1
Download/Upload Rate 300 / 375 Kbps LTE Cat-M1:300 / 375 Kbps
LTE Cat-NB1: 32 / 70 Kbps
Band options

LTE Cat-M1:
    1900(B2)/1700(B4)/700(B12) MHz

LTE Cat-M1/Cat-NB1 :
LTE FDD:
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28

LTE Cat-M1 :
LTE TDD :B39
Antenna Connector(SMA Female) 1
WLAN Interface
Antenna Connector Reverse SMA Female connector x2
Radio Frequency Type DSSS, OFDM
Modulation IEEE802.11a/g: OFDM with BPSK, QPSK, 16QAM, 64QAM
IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11n : BPSK, QPSK, 16-QAM, 64-QAM
Frequency Band America / FCC : 2.412~2.462 GHz (11 channels)
5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels )
Europe CE / ETSI : 2.412~2.472 Ghz (13 channels)
5.180~5.240 GHz (4 channels)
Transmission Rate IEEE802.11b: 1 / 2 / 5.5 / 11 Mbps
IEEE802.11a/g: 6 / 9 / 12 / 18 / 24 / 36 / 48 / 54 Mbps
IEEE801.11n: up to 300Mbps
Transmit Power I802.11a: 12dBm ± 1.5dBm
802.11b: 17dBm ± 1.5dBm
802.11g: 15dBm ± 1.5dBm
802.11gn HT20: 13dBm ± 1.5dBm@150Mbps
802.11gn HT40: 12dBm ± 1.5dBm@300Mbps
802.11an HT20: 12dBm ± 1.5dBm@150Mbps
802.11an HT40: 12dBm ± 1.5dBm@300Mbps
Receiver Sensitivity 802.11a: -68dBm ± 2dBm@54Mbps
802.11b: -85dBm ± 2dBm@11Mbps
802.11g: -68dBm ± 2dBm@54Mbps
802.11gn HT20: -68dBm ± 2dBm@150Mbps
802.11gn HT40: -68dBm ± 2dBm@300Mbps
802.11an HT20: -68dBm ± 2dBm@150Mbps
802.11an HT40: -68dBm ± 2dBm@300Mbps
Encryption Security WEP: (64-bit ,128-bit key supported)
WPA/WPA2 : 802.11i(WEP and AES encryption)
WPAPSK (256-bit key pre-shared key supported)
802.1X and Radius supported
TKIP encryption
Wireless Security SSID broadcast disable and enable
Serial Ports
Connector Terminal Block x 1 (Port 1), DB9 male x 1 (Port 2)
Operation Mode  Port 1 : RS-422/RS-485(2W/4W), Which can be configured by utility
Port 2 : RS-232/RS-422/RS-485(2W/4W). Which can be configured by utility
Serial Baud Rate 110 bps to 921.6 Kbps
Data Bits 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
Serial signals RS-232 :       TxD, RxD, DCD, RTS, CTS, DSR, DTR, RI, GND
RS-422 :       TX+, TX-, RX+, RX-, GND
RS-485 (2W):  D+, D-
RS-485 (4W):  TX+, TX-, RX+, RX-, GND
LED Indicators
Power indicator PWR 1(2) / Ready:
Green On: Power is on
10/100/1000Base-T(X) RJ45 port indicator 2 x LEDs,
LNK/ACT: Green for port LNK/ACT
Speed: Green for port Link at 1000Mbps
Amber for port Link at 100Mbps.
Off for port Link at 10Mbps
WLAN indicator Green Solid On: RF on, Blink: data transmitting
Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100%
Fault Power failure or port disconnected
WAN Green on : Modem module detected
Green blinking : Modem module being activated		 Green on : Modem module detected
Green blinking : Modem module being activated
Serial TX/RX LED

Red : Receiving data

Green : Transmitting data
Power
Input Power

Dual DC inputs. 12-48VDC on 6-pin terminal block
Power Consumption (Typ.) TBD TBD
Overload current protection Present  
Reverse polarity protection Present  
Physical Characteristics
Enclosure IP-30
Dimensions (W x D x H) 74.3 (W) x 109.2 (D) x 153.6 (H) mm (2.93x4.30x6.05 inch)
Weight (g) 1050 g
Environmental
Storage Temperature -40 to 85°C (-40 to 185°F)
Operating Temperature -40 to 70°C (-13 to 158°F)
Operating Humidity 5% to 95% Non-condensing
Regulatory Approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950-1
MTBF 283297.3193 hours US : 261406.4413 hours
EU : 266562.8536 hours
Warranty 5 years


PDF Datasheet
All notices and queries pleas direct to Sales Department
Atel Electronics - Opole, ul. Oleska 121, phone +48 0-77 / 455 60 76, fax + 48 0-77 / 455 80 56
e-mail: cust@atel.com.pl, www.atel-electronics.eu
printer version send top