MENU
#08245
Access sensor (Vutlan VT530)
The sensor made for checking whether the doors and windows have not been opened / closed.
| Installation |
Using patch-cable RJ-11 the sensor is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. One of devices in the kit, for example, magnet, is mounted on a door; the second device is mounted on a jamb of a door. At opening a door contact is disconnected, and system of monitoring receives notification on opening. The first sensor is connected using patch-cable RJ-11 to an analog input of the system unit, the consequent sensor is connected via patch-cable RJ-11 to an output of the first sensor and so on. |
|---|---|
| Set includes |
Contact sensor, magnet, 4-wired patch cable RJ-11 (2m), two screws 4.8×16mm, 2 screws M5 and 2 nuts, bracket, double sided sticker. |
| Max. distance | 150m |
| Net weight | 106g |
| Dimensions (LHW) | Two compact devices with dimensions 60×18×18mm |
#08154
DC voltage monitor (Vutlan VT410)
DC monitor is used for the measurement of DC voltage up to 75V and converting data into the format of the IP monitoring system. The system interface allows you to assign the sensor and to introduce the function data conversion.
| Voltage measured | 0-75V |
|---|---|
| Accuracy of measurement | 1% |
| Max. distance m | 50m |
| Net weight | 100g |
| Dimensions (LHW) | 60×18×18 mm |
Only a 6P6C RJ12 cable can be used with the sensor! The cable is included with the sensor.
.jpg?1639493327)
#03108
DIN AC voltage monitor (Vutlan VT520DIN)
The sensor is used for the measurement of 0-246V, AC. It has a very high 1% accuracy. It can be used with any Vutlan monitoring system. DIN rail 35mm mounting.
| Voltage measured | 0-246V AC |
|---|---|
| Accuracy of measurement | 1% |
| Max. distance m | 100m |
| Net weight | 125g |
| Dimensions (HxWxD) | 90.2×36.3×57.5mm |
#08239
Humidity sensor 5% (Vutlan VT510)
The sensor is made for measurement of relative humidity 10-95% indoors with a relative accuracy of 5%.
| Technical specifications | |
|---|---|
| Measured humidity range | 10-95% RH |
| Accuracy | 5%RH |
| Working temperature | -10 .. +80°C |
| Features | |
| Installation | On the bottom there is a ledge with Ø4.5mm and height 1mm and a Ø5mm mounting hole fpr mounting the sensor. |
| 5mm from it for fastening the sensor using 4.8×16 mm screw. | |
| Connection | Humidity sensor contains RJ-11 jack and is connected to an analog input of any system unit. Determination of type of sensor and connection occur automatically. |
| Supply includes |
Sensor, 4-wired patch cable RJ11 (2m), 4.8×16mm screw, double sided sticker. |
| Net weight | 60g |
| Dimensions | 60×18×18mm |
| Max distance | 150m |
#08247
Motion detector (Vutlan VT570)
Sensor made for movement detection via infra-red.
| Technical specifications | |
|---|---|
| PIR detection angle | 110° |
| Max. detection distance | 50 m |
| Features | |
| Installation | On the bottom there is a mounting slot for fastening the sensor with a plastic bracket. |
| Connection |
Motion sensor contains RJ-11 jack and is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. To adjust sensitivity, read manual. To change cable connection, open the cover and read manual. |
| Dimensions (LxHxW) | 105×57×40mm |
| Net weight | 133g |
| Supply includes |
Sensor, cable RJ11 2m, 4.8×16mm screw, 2-pin terminal strip type TBW-5-2p, double sided sticker. |
#08243
Outdoor temperature sensor (Vutlan VT501)
The sensor made for measurement of temperature outside of buildings, can also be used indoors.
| Technical specifications | |
|---|---|
| Operating temperature | -50...+105°C |
| Accuracy | 3°C |
| Max. distance | 100m |
| Features | |
| Installation |
An all-weather 2-pair UTP cable of 15m emerges from the cylinder. After installation of cylinder outside of a building, the cable must be placed to reach the system unit. |
| Connection | After installation RJ-11 connector is connected to an analog input of any system unit. Determination of type of sensor and connection occur automatically. |
| Supply includes | 4-wired cable RJ11 (15m) with sensor head |
| Net weight | 340g |
| Dimensions (LHW) | Device has a shape of a Ø7×23mm cylinder |
#03111
Radar motion sensor (Vutlan VT572)
A microwave radar high-performance sensor is used for the detection of objects or human movement. This product is an indoor energy-saving high-sensitivity detector.
The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls.
The scanned signal can penetrate plastic, glass, ceiling, wooden door, and thin walls.
| Technical specifications | |
|---|---|
| PIR detection angle | 120° |
| Sensing distance | maximum is 12 meters |
| Frequency Range | 5.725GHz-5.875GHz |
| Max. detection distance | 100 m |
| Features | |
| Installation | On the bottom there is a mounting slot for fastening the sensor with a plastic bracket. |
| Connection |
Motion sensor contains RJ-11 jack and is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. To adjust sensitivity, read manual. To change cable connection, open the cover and read manual. |
| Supply includes |
Sensor, cable RJ11 2m, holder |
#08246
Smoke sensor (Vutlan VT560)
The sensor monitors occurrence of smoke.
| Technical specifications | |
|---|---|
| Sensitivity | 0,05 - 0,2 db/m |
| Features | |
| Installation | On the bottom there are Ø5mm mounting holes for fastening the smoke sensor to the surface by 4.8×20mm screws or/and bracket and M4 screws. |
| Connection |
Detector's jack RJ-11 is connected to an analog input of any system unit using patch-cable RJ-11. Determination of the sensor's type and connection occur automatically. The monitoring system allows to connect several smoke detectors into a linear circuit. For this purpose each detector has two jacks RJ-11 input and output. The first is connected to an analog input of the system unit using a patch-cable RJ-11, the consequent is connected via patch-cable RJ-11 to an output of the first detector and so on. as one sensor with one address. |
| Supply includes |
Detector, 4-wired cable RJ11 (2m), 2 screws and 2 nuts M4, 2 screws 4.8×20mm, bracket, double sided sticker. |
| Net weight | 290g |
| Dimensions (LHW) | Ø100×45 |
| Max distance | 150m |
#03110
Spot leak sensor (Vutlan VT593)
The sensor is used for level monitoring of conductive liquids in containers, pits, cellars, etc. Or it is used for leakage detection. The sensor has two stainless steel poles. The detector is encapsulated in plastic housing for conductive liquids. Can be placed near plumbing, trays, raised floors, under equipment, sinks, aquariums, sump pumps, refrigerators, dishwashers, toilets, basements, washing machines, water heaters, and garages.
| Technical specifications | |
|---|---|
| Temperature range | -10… +80°C |
| Max. distance | 100 m |
| Connection | Connector RJ12 is connected to an analog input of any system unit. Determination of sensor's type and connection occur automatically. |
| Set includes |
Sensor, adapter, 4-wired cable RJ-12 (2m) |
| Net weight | 60g |
| Dimensions (LHW) | 60×18×18mm |
#08242
Temperature sensor (Vutlan VT500)
The sensor is made for measurement of temperature indoors.
Measuring range: -10 ÷ 80°C
Measuring range: -10 ÷ 80°C
| Technical specifications | |
|---|---|
| Operating temperature | -10 ÷ 80°C |
| Accuracy | 1°C |
| Features | |
| Installation | On the bottom there is a ledge with Ø4.5mm and height 1mm and a Ø5mm mounting hole for fastening the sensor using a 4.8×16 mm screw. |
| Connection | Temperature sensor contains RJ-11 jack and is connected to an analog input of a system unit. Determination of type of sensor and connection occur automatically. |
| Supply includes |
Sensor, 4-wired patch cable RJ11 (2m), 4.8×16mm screw, double sided sticker. |
| Net weight | 50g |
| Dimensions (LHW) | 60×18×18mm |
| Max distance | 100m |
Page 2 of 7
|
