MENU#05375
Wireless active devices 2.4GHz › AT8-4
Wireless Access Point (AT8-4)
| Standard | IEEE 802.11a/b/g |
|---|---|
| Chipset | Atheros AR5112 i AR2312 |
| Frequency band | 2400 MHz ÷ 2483,5 MHz, 5150 MHz ÷ 5350 MHz, 5470 MHz ÷ 5725 MHz |
| Max. speed | 108 Mbps |
| Radio modes | 11b/g, 11g, 11a, SuperA |
| Max. TX power | 20 dBm |
| Operational modes | Bridge, Access Point, Client Infrastructure, Client Ad-hoc |
| Modulation | 802.11a - OFDM, 802.11b - DSSS, 802.11g - OFDM |
| Antenna | detachable, SMA-RP |
| WDS | 8x |
| Access Control | SSID, MAC Address Control, max. clients |
| WLAN Security | WEP 64/128/152-bit, WPA-PSK, WPA-TKiP/AES, RADIUS |
| Addressing | fixed IP, DHCP client |
| Management | WWW, telnet, UPnP |
| Log | system log, Syslog |
| Dimensions | 124,3x154,4x41,0 mm |
| Operational temperature | 0°C ÷ 40°C |
| Operational humidity | 10% ÷ 90%, non-condensing |
| Certificates | CE, FCC, TELEC |
| Manufacturer | Wistron |
Unit can function as AP Client, but to get such functionality you have to upgrade firmware to EA version. Ethernet Adapter can be reverted to AP state by upgrading firmware to AP version.
Note!!!
Firmware exchange from AP to EA version and back should be done after disabling device's firmware signature. It can be done from telnet by using command "z_debug signature disable".
Please be advised to upgrade firmware ONLY when connected directly to LAN port of the device. Standard IP address after switching to EA is 192.168.1.2.
Note!!!
Firmware exchange from AP to EA version and back should be done after disabling device's firmware signature. It can be done from telnet by using command "z_debug signature disable".
Please be advised to upgrade firmware ONLY when connected directly to LAN port of the device. Standard IP address after switching to EA is 192.168.1.2.
Software&Drivers
2006-07-17 Firmware AP (v. 1.09.e01) + EA (v. 1.04.e01) (3,93 MB)
2005-10-24 Firmware for AP client w/ACK mode v.1.03.e04 (1,87 MB)
2005-10-24 Firmware for AP/Bridge w/ACK mode v.1.08.e05 (2,02 MB)
2005-08-19 Firmware for AP/Bridge mode v.1.03.e16 (1,94 MB)
2005-08-19 Firmware for AP client mode v.1.02.e19 (2,08 MB)
2005-08-19 Firmware for AP/Bridge w/ACK mode v.1.07.e01 (2,02 MB)
Configuration/Applications
Net Price: 9.27 USD Unit: pcs
|
|
Minimal order quantity: 1 x pcs Quantity in the smallest collective package: 1 x pcs |
| [+]add item to comparison | show comparison [0] |
All products' documentation is published in PDF (Portable Document Format), which requires Adobe Reader (ver. 5 and newer) software for viewing.
|
